SDS

Conforms to OSHA HazCom 2012 & NOM-018-STPS-2000 Standards
Trade Name: PB Penetrating Catalyst (Aerosol)
Print date: 2016-02-03
Page 5 of 10
!
!
SAFETY DATA SHEET
8.2 EXPOSURE CONTROLS
Engineering Controls:
Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
8.3 INDIVIDUAL PROTECTIVE MEASURES
Personal Protective Equipment:
Eye/Face Protection:
Safety glasses with side-shields.
Skin Protection:
Hand Protection:
Wear chemically resistant protective gloves.
Body Protection:
Wear suitable protective clothing.
Respiratory Protection:
A NIOSH approved respirator is recommended in poorly ventilated areas
or when permissible exposure limits may be exceeded. Respirator
selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected
respirator.
General Health and Safety
Measures:
Do not eat, smoke or drink where material is handled, processed or
stored. Wash hands carefully before eating or smoking. Handle
according to established industrial hygiene and safety practices.
Ensure that eyewash stations and safety showers are close to the
workstation location.
9.1 INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Viscous / Oily.
Color:
Orange.
Odor:
Heavy aromatic.
Odor Threshold:
Not available.
Physical State:
Gas/pressurized liquid.
pH:
Not available.
Melting Point/Freezing Point:
Not available.
Initial Boiling Point and Boiling Range:
177.8 °C (352 °F)
Flash Point:
65.6 °C (150 °F)
Evaporation Rate:
<1 (n-butyl acetate = 1)
Flammability:
Flammable.
Lower Flammability/Explosive Limit:
Not available.
Upper Flammability/Explosive Limit:
Not available.
Vapor Pressure:
Not available.
Vapor Density:
>1 (Air = 1)
Relative Density/Specific Gravity:
0.91 (Water = 1)
Solubility:
Negligible.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES