Technical data

BDC 1216 Operating Manual
Initial operation
3
þ Connect the Blastrac dust collector and the Blastrac machine
with the dust hose. Use hose clamps at the connections.
þ Check that the dust bin of the dust collector is empty.
þ Put the dust collector near the working place and press down the
lever in order to lock up the front wheels.
5.2 Initial operation
The start of the dust collector is effected in the following sequence:
Switching on of the dust collector
þ Connect the dust collector to the power supply, and check if the
voltage and the frequency coincide with the specifications
indicated on the type plate.
þ Put the switch in the "ON" position in order to start the aspirating
engines.
The dust bin of the dust collector must be emptied regularly.
Observe the waste disposal regulations,
in uncertain situation ask
your next policy level.