© BLANKET Customer Support Visit emblematically for customer support regarding your device. To submit a request, fill out the required information online. You will be provided a ticket number regarding your issue which you can refer to when contacting us further. You can also reach an Emetic customer service representative by calling: 1-888-968-1985, We are open Monday Friday PST, except weekends and major holidays.
Important Notice & Precautions Thank you for using our company multimedia player To operate the unit co neatly, please read the operation manual carefully before using. Keep this operation manual for further reference. The unit is designed only for DC 12 negative ground operation system. Make sure your vehicle is connected to DX 12V negative ground electrical system. Be sure to connect the speaker {} leads tithe speaker terminal.
Troubleshooting No Power Check and make sure the connecting wires ave connected properly. Check whether the fuse is brown. Replace with the proper value fuse If necessary. No Sound Check to make sure the speaker wires are connected properly: No Picture Che whether the video wire Is connected to the video device. Unit Hang Up ~Turn off the unit and restart again or unplug the unit from the power supply & reconnect.
Main Unit Operation Symbols, icons and phrasing as show may be varied from the exact main unit. They also show the full function of various versions and may not be available in this unit. Refer to the main unit for exact functions and features that ars applicable. Poy RIPOFF When the unit is tuned off, press to turn on the unit. When the unit is muted on, pass and hold shortly to tum off the unit. SRE MOB Mode Selection “hen the units turned on, press repeatedly to select desired mod for aeration.
17. Hii Ont all odes, press to start pause or resume. TENT On music playback mode under Disc / USB / SI card Input, press to start Intro playback of the Input device. Press again 10 resume to normal playback mode. 13. RPT On Disc # USE / SD card playback mode, press to select various repeat playback modes of the device. Note: Depends on different type of discs and media files that recorded, not all operations as described in the above operation manual cars be functioned.
© BLANKET cos || «High Quality Poiyprapyiens Cone «Butty Rubber Surround + 17 High Temperature Aluminum Vole Col «Ceramic Magnet CD & MP3 RECEIVER WITH eerie sews ok «Impedance: 4 Chin PAIR OF 6.
Mounting NOTE: BLANKET strongly recommends that you operate your system at low volume levels prior to the completed installation of your BLANKET series speakers. This will allow for a test of the speakers before permanently securing them to a location. CAUTION: Make sure that all of the speaker's wiring is fully protected from cuts, tears and possible wear. Any short circuits created from cuts, tears of wear could severely damage the source unit or amplifier.
