LS 162e Instruction Manual WiFi Car DVR
Names of Parts Mic microSD Card Slot Lens GPS Receiver Slot Tripod Mount LCD Panel Micro USB Port Micro HDMI Port Power/Menu Button Status Indicator Record / Emergency Button Speaker English | 1
Accessories Tripod Mount USB Cable User Manual 2 | English Strap Mount Car Charger Strap Car Mount
Getting Started Inserting a microSD Card Before initial use, insert a microSD card. (suggested at least 4GB, up to 64GB) microSD card Note: When using a new microSD card, foramt the card by your camcorder. Charging the Unit Fully charge camcorder for initial use by: • Car charger • PC USB port • USB adapter (not included) During charging, screen shows battery icon or status indicator flashes in orange. When camcorder is fully charged, the indicator turns off. Shooting a Video 1.
Camcorder Operation In preview, press to enter menu settings. Button functions indicated above .Use to navigate menu settings. Menu Settings Camcorder has eight menu settings. Advanced settings can be set up via mobile APP. Menu Settings Playback Action Cam Dash Cam Auto REC 60 SEC OFF Descriptions Play recorded videos Switch between Action Cam and Dash Cam.
Record Modes Camcorder has two recording modes for different applications: Action Cam: Shoot normal videos. Dash Cam: Shoot loop and emergency videos. Comparison between modes: Mode Record type Record trigger Record duration Display info. Action Cam Dash Cam Normal Press Loop in preview Unlimited Three min. sections 00:06:36 SD card remaining time Emergency • Car impact • Press during loop recording One min.
Wireless & APP Operation Before inital using wirless connections, download and install APP 【Blaupunkt Mobile DVR Control】 from Google Play Store and Apple Store. 【Blaupunkt Mobile DVR Control】 has two functions: (1) Local - Direct control (2) Internet - Internet live view Blaupunkt Mobile DVR Control (1) Local 【Local】 Internet Mobile connects to camcorder directly via WiFi for remote control, live view, album management and camcorder setup.
Local 【Local】Function Internet Before using mobile APP's【Local】function, ensure camcorder WiFi is on and camcorder Cloud setting is off. Once WiFi is ready, preview shows camcorder name (R2-xxxxxxxx) for few seconds. Mobile Connects to Camcorder 1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camcorder name. 2. Run 【Blaupunkt Mobile DVR Control】. 3. Tap【Local】and select the camcorder to enter【Local】View Page.
4.【Local】function has three function pages: View, Album and Setup. View Page Items Descriptions Shoot videos and files are saved into camcorder microSD card Shoot videos or Take photos and files are saved into mobile "Album\Blaupunkt Mobile DVR Control\" For multiple camcorders user : • Enable Quad-View for multiple live view on mobile • In Quad-View, select a window for single view.
Camcorder SD Card Setup When SD card is first-time use or reformatted in camcorder, user should allocate memory for Action Cam and Dash Cam. Go to [Setup] [Camcorder Settings] Adjust slide bar and press [Format] button to complete SD card setup. Camcorder Internet Setup Before using internet cloud service, Email and AP must be properly set up. 1. Go to [Setup] [Internet Settings] Edit Email and AP 2. Tap [Save] to complete Email & AP settings.
Motion Detector Setup When car's engine stops and motion is detected, camcorder automatically records videos till no motion is detected. 1. Set Camcorder to dash cam mode. 2. Go to APP [Setup] [ Car DVR Settings] Turn on [Motion Detector] Tap [Save]. 3. Camcorder shows on screen. 4. When car's engine stops, operate camcorder to active [ Motion Detector]. G-Sensor Setup When camcorder is recording and any impacts happen, camcorder automatically records emergency events if G-Sensor is set.
Local Internet 【Internet】Function Before using APP's【Internet】function, ensure camcorder internet setup has been completed. Camcorder Connects to Cloud Server Enable [Cloud ] in camcorder to upload video streaming to cloud server. Connecting status will be shown on screen. Status Descriptions Connection successful. Preview shows [ camcorder ID.
Troubleshooting Situation Camcorder cannot turn on Cause/Solution Power is low.
GPS Receiver 1. Hardware operation Insert GPS receiver into your device. 2. Install Software to Computer 1. Connect camcorder to PC via standard Micro USB cable. Note: The USB cable in accessory kit is only for power supply in car. Please use other Micro USB cable for installation (ex. Android smart phone's usb cable). 2. Find Setup.exe in "My computer\Removable Disk\DCIM". 3. Double click Setup.exe to install/ 3. Software operation 1.
• Press to select your SD card. (Unieye Map only can read the video files in SD card ) • Press to forward/play/stop/backward your video. • Press to adjuest the volumn of your video. 2. Speed Meter • Show the speed inforamtion from the records of the video. • Press to switch the scales of meter in Kilometer per hour. • Press to switch the scales of meter in Mile per hour. 3. Compass • Show the moving direction from the records of the video. 4. Calendar • Press : move to next month.
5. PIP Mode • In Windows mode, press to change view to Full Screen mode. • The defualt view of Full Screen mode : video in parent window, map in child window. • In Full Screen mode, press mode. to switch view back to Windows 6. PIP Switch • Press to switch map in parent window, video in child window. • Press again to switch back.
Blaupunkt Technology GmbH Robert-Bosch-Str. 200 D-31139 Hidesheìm www.blaupunkt.