User manual

7
Placing the device in operation | DAB mode
• The display brightness can be adjusted
separately for day and night (see the chap-
ter "User settings", section "Making set-
tings in the "DISPLAY" menu", menu items
"DIM DAY" and "DIM NIGHT".
쏅 Press the DIS button
@ for approx. 2 seconds
to manually switch the display brightness.
Switching demo mode on/o
The demo mode shows the functions of the car
sound system as scrolling text on the display. By
pressing any button, the demo mode is interrupt-
ed and you can operate the device.
The demo mode can be switched on and o in the
user menu (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu", menu
item "DEMO MODE").
DAB mode
With DAB, you can enjoy radio in digital sound
quality.
In contrast with standard radio broadcasting, sev-
eral programmes (services) are always broadcast
over the same frequency for DAB. These services
are combined into a so-called ensemble. In some
cases, the same service can be received in di er-
ent ensembles.
Note:
You will need a special DAB antenna to be
able to receive DAB signals. This can be a
separate DAB roof/window antenna or a DAB/
AM/FM combination antenna.
Changing to DAB mode or selecting a
DAB memory bank
쏅 Press the SRC button ? repeatedly until the
desired DAB memory bank is displayed:
DAB1
씮
DAB2
씮
DAB3
If DAB mode is switched on, the display shows
the symbol
.
Notes:
• Up to 5 services can be stored in each DAB
memory bank.
• DAB memory banks can be activated or de-
activated via the user menu (see the chap-
ter "User settings", section "Making set-
tings in the "DAB TUNER" menu, "PRESETS"
menu item). Deactivated DAB memory
banks are skipped during the source selec-
tion with the SRC button
? .
Tuning into ensembles/services
With DAB, several services broadcast over the
same frequency are always combined into an
"ensemble".
Selecting an ensemble
You can directly select ensembles that you have
received once already (for this to work, the ensem-
ble must be receivable).
쏅 Brie y press the
/ button 7 to change
to the previous/next ensemble.
The  rst available service in the ensemble is
played.
Note:
With activated PTY function, the next service
with the currently selected programme type
is set (see the section "DAB-PTY" in this chap-
ter).
Ensemble seek tuning
You can  nd new ensembles using seek tuning.
쏅 Press the
/ button 7 for approx. 2 sec-
onds to start the search for an ensemble.
The seek tuning stops if an ensemble is being
received. The  rst available service in the en-
semble is played.
Selecting a service
After you have tuned into an ensemble, you can
select a service from the ensemble.
쏅 Brie y press the
/ button 7 to change
to the previous/next service.