FULL HD 1080p Frameless 3D LED TV User Guide 42/333I-GB-5B-F3HBKUP 47/333I-GB-5B-F3HBKUP
Important Safety Instructions IMPORTANT - Please read these instructions. All the safety and operating instructions should be read before the appliance is operated. Warnings • • To reduce the risk of fire, electric shock or damage to the television, do not expose it to dust, rain or moisture, or place any objects filled with liquids on or near the television. Do not place the television in a confined space, ensure that nothing can obstruct the ventilation openings at the rear of the television.
Important Safety Instructions IMPORTANT - Please read these instructions. All the safety and operating instructions should be read before the appliance is operated. Important Information - Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays The extended use of fixed image program material can cause a permanent “shadow image” on the LCD panel. This background image is viewable on normal programs in the form of a stationary fixed image.
Important Safety Instructions IMPORTANT - Please read these instructions. All the safety and operating instructions should be read before the appliance is operated. 3D Safety Information • • • • • If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight. Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes.
Contents Manufacturers Guarantee Information Important Safety Instructions What is included in the box Attaching the stand 3 4-6 8 9-10 Detaching the stand and securing the TV to a wall 11 Wall mounting 12 Getting Started - Initial Set Up 13 TV Buttons and Input Source Menu 14 Remote Control 15 Connections 16-18 TV Menu Operation 19-25 Channel Menu Picture Menu Sound Menu Time Menu System/Hotel Lock Menu Setup Menu 3D Settings PC Operation 19 20 21 22 23 24 25 26-27 7 Day TV Guide 28 USB
What Is Included In The Box Accessories Included with this TV are the following accessories: 1 x User Guide 1 x Remote Control User Guide 1 x Quick Start Guide 2 x AAA Batteries 1 x RF Cable 1 x TV 4 x 3D Glasses 1 x Stand Installation Pack Screws For 42” Screws For 47” 6 x M(4x16) 4 x M(4x14) 5 x ST(4x20) 5 x ST(4x20) Please save your packaging as you will need this in the event of warranty/service repair or support.
Attaching The Stand For 42” TV Set To complete the stand installation you will require a Phillips screw driver. The Stand Installation pack comes with two sets of screws. 6 x M(4x16) 5 x ST(4x20) fig 1) Attach the stand neck to the rear of the TV set. 1 fig 2) Secure the neck to the TV using the 6 x M (4x16) screws provided. 6x M (4x16) 2 fig 3) Attach the stand base to the neck. 1 1/2 3 fig 4) Secure the base to the neck using the 5 x ST (4x20) screws provided.
Attaching The Stand For 47” TV Set To complete the stand installation you will require a cross head screw driver. The Stand Installation pack comes with two sets of screws. 4 x M(4x14) 5 x ST(4x20) fig 1) Attach the stand neck to the rear of the TV set. 1 fig 2) Secure the neck to the TV using the 4 x M (4x14) screws provided. 4 x M(4x14) 2 fig 3) Attach the stand base to the neck. 1 1/2 3 fig 4) Secure the base to the neck using the 5 x ST (4x20) screws provided.
Detaching The Stand And Securing The TV To A Wall Detaching the Stand For 42” models only. To detach the stand please remove the 6 screws highlighted then remove the stand neck and base from the rear of the TV set. For 47” models only. To detach the stand please remove the 4 screws highlighted then remove the stand neck and base from the rear of the TV set. 4 x M(4x14) 6x M (4x16) Securing the TV to a Wall For maximum security in the home when using a TV with its stand anti-tip straps should be fitted.
Wall Mounting IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any electric wires, water or gas pipes. To complete the stand installation you will require a cross head screw driver. 1) Remove the four screws highlighted below. 2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes are indicated in the picture below.
Getting Started - Intial Set Up 1) Using the RF cable supplied, connect the TV to the TV Aerial wall socket (Fig A) 1 Fig B Connect the power cable to the Electrical outlet (Fig B) Fig A 2) Switch on the television using the power on/off switch located on the side of the TV. 3) Insert the batteries supplied into the Remote control and press the Standby button to power on the TV 2 Power on/off 4) You will now be welcomed with the initial set-up screen.
TV Buttons & Source Menu 1 2 3 4 5 6 7 1. Volume up and menu right 5. Displays Menu/OSD 2. Volume down and menu left 6. Displays the input source menu 3. Programme/Channel up and menu up 7. Standby Power On/Off 4. Programme/Channel down and menu down Choosing Mode Input/Source To switch between the different input/connections. A) Using the buttons on the remote control: 1) Press [SOURCE/ AV] - The source menu will appear 2) Press [\/] or [/\] to select the input you require.
Remote Control Viewing remote control - TV 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. STANDBY MUTE DTV RADIO DVD USB NUMBER BUTTONS TV GUIDE - To return to the previous channel viewed P.MODE - Scrolls through picture mode options VOL CH S.MODE - Scrolls through sound mode options FAV - To display favourites menu MENU EXIT - Allows you to navigate the on-screen menus and adjust the system settings to your preference 18. SOURCE/AV 19.
Connections 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 COAX USB HDMI 3 9 COAX Audio Out USB HDMI 3 CI CARD IN Video R/L Audio in COMPONENT (HD) EARPHONE HDMI 1 HDMI 2 VGA PC Audio In VGA PC RF IN 6 5 4 CI CARD IN VIDEO 10 Digital Coax output USB Input HDMI input Common Interface module Video Input Component Audio input Component input (YPbPr) Earphone Socket HDMI input HDMI input 3.
Connections Connecting a DVD Player/Recorder, Video Recorder or Cable/Satellite Box TVs Input/Source should be set to Analogue RF in DVD or VCR TV Aerial Wall Socket RF IN RF OUT Connecting a Camcorder, Camera or Games Console Source should be set to Video Camera or Camcorder Yellow Video White Audio In L/R Red Connecting a High Definition (HD) Device Option 1 - via HDMI to HDMI cable A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio with minimal loss
Connections Connecting a High Definition (HD) Device Option 2 - via Component cable If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you must connect via Component (for picture) and by phono cable (for sound). TV Source should be set to Component. Component (HD) Red Green Blue Audio L/R Component Red White Audio In L/R Connecting to an external audio device (Amplifiers, Surround Sound, Sound Bars etc*) When connecting via the TV’s 3.
Channel Menu To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] Auto Tuning Allows you to retune the television for all digital channels, digital radio stations and analogue channels. Analogue Manual Tuning Allows you to manually tune your analogue signal If you wish to make changes to any of the default buttons. To confirm settings, use the scroll any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Picture Menu A AV Picture Mode • Dynamic - Recommended settings for fast moving pictures • Standard - Default settings • Mild - Set to be lighter in colour and less bright • Personal - Lets you manually alter all the settings • Economy - Power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel).
Sound Menu Sound Mode • Standard - Default settings • Music - Emphasises music over voices • Movie - Provides live and full sound for movies • Sports - Emphasises sound for sports • Personal - Selects your personal sound settings Treble To adjust the amount of high frequency within the sound Bass To adjust the amount of low frequency within the sound Balance To switch the sound between the left and right speakers Auto Volume Level (AVL) When ‘on’ is selected, the volume will stay at a constant level regard
Time Menu A AV To access this menu, press [MENU] button on the remote control and scroll right. To enter a menu press [OK] Clock Shows the date and time Off Time Allows you to set a specific time for your TV to turn off If you wish to make changes to any of the default settings, use the scroll buttons. To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
System/Hotel Lock Menu AV AV System/Hotel Lock Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password use the button to quit the password input. Use the button to clear. Default password is 0000 TV Button Lock Allows you to lock the buttons on the side of the TV set To access this menu, press [MENU] button on the remote control and scroll right. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons.
Setup Menu Within the UK the picture format varies depending on the channel/broadcast. There are a number of different options to best meet your needs Language Allows you to change the language of the menu • Auto - Automatically displays the best picture format. So the picture is in the correct position. May have black lines at the top/bottom and/or sides. • Original - Will display the picture from the broadcaster without any change • 4:3 - Displays the 4:3 picture in its original size.
3D Settings For the best 3D picture effect, watch your TV from vertical angle +/- 10°. 3D Type When connecting a 3D product sometimes the picture maybe displayed incorrectly; choose from the following settings to correct this. You can toggle these settings by pressing the '3D' button on your remote 3D Off Default settings Side by Side 3D format is commonly used in 3D broadcasting, works by halving the horizontal resolution of videos to store left and right eye images in each frame.
Using The Television As A Computer Monitor How to set up for Windows XP & Windows Vista (connecting via VGA cable to the TV) IMPORTANT – Before connecting the computer to the television you must ensure the computer settings are correct for the television. You MUST do this using your old monitor. 1) Switch on your computer 2) When finished booting up right click your mouse anywhere on the screen 3) Left click your mouse on Properties/Personalise 4) Left click your mouse on Setting/Display Settings.
PC Settings A AV To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] Auto Adjust Lets you automatically configure the television to be used as a computer monitor If you wish to make changes to any of the default settings, use the scroll buttons. To confirm any settings press [OK] button. H Offset Changes the horizontal position of the picture To exit this menu at anytime, press [EXIT] button.
7 Day TV Guide TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported by the freeview channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders. 1) Press [TV GUIDE]. The following 7 Day TV Guide will appear.
USB Mode / Media Player USB mode offers playback of various different types of content that you have saved on your USB Memory Stick. 1) On switching to USB source the above menu screen will appear. The content will be divided into Photo, Music, Movie and Text based on file type. 1) You can navigate through the menus using the scroll buttons. To confirm the item you wish to play/view press [OK] button. 2) Select the drive you require. (If your drive only has 1 partition you will only see 1 item).
USB Record - Digital Mode USB RECORD – FREEVIEW/SAORVIEW MODE Built into this television is a USB record facility. This function is available in Freeview/Saorview mode when used in conjunction with a compatible USB memory stick or USB hard drive.
Using Your TV With a Sky Digital Set Top Box Option 1) Connecting your TV to your Sky box (when both the TV and Sky Box are located in the same room) Depending on your Sky Box & TV model, connect either by SCART or HDMI cables (available separately) If connecting by SCART, select the ‘Input source’ on the TV as SCART.
Frequently Asked Questions General I would like to have louder sound by connecting additional speakers Subject to the TV model and connections, it is possible to connect the TV to an external amplifier or surround sound (subject to connections/inputs on the device) as follows:1) Connect a COAX cable* from the TV’s COAX output to your amplifier/ surround systems COAX input 2) Connect a 3.5mm jack to L/R phono cable* from the TV’s headphone socket (where fitted) to your amplifier/surround sound L/R input.
Frequently Asked Questions Game Consoles I have connected my Xbox 360 to the TV via Component Cables (Red, Green & Blue) but I am not receiving any sound Component cables only provide HD Pictures. For the sound you will need to connect the Red & White audio cables on the Xbox to the Red & White phono inputs on the rear of the TV. Please refer to the ‘Connections’ pages. USB Mode I have inserted a USB Memory Key, but the TV does not recognise it Ensure the USB Memory Key is formatted to type FAT32.
Technical Specification Model 42/333I-GB-5B-F3HBKUP Screen size (diagonal) 47/333I-GB-5B-F3HBKUP 42”/107cm 47”/119cm Resolution 1920 x 1080 RF 75 ohm Antenna / PAL-SECAM Video Inputs 3 x HDMI, 1 x VGA/PC, 1 x USB, 1 x Composite/Video, 1 x Component/YPbPr Sound Inputs 1 x shared audio for Composite/Video & Component/YPbPr, 1 x 3.5mm jack for PC audio input Sound Outputs 1 x Coax Audio output , 1 x 3.
