Audio System Handbook Blaupunkt 520 1
1 ; < 2 3 4 5 = 6 7 8 9 : > ? 3
LHS Steering Remote Control 4 RHS Steering Remote Control @ C A D B E
Security Code The PIN code should also be written down and kept with other important documents. Your radio includes an electronically coded security system. This security system relies on an unique PIN code to enable operation of your radio. The number only needs to be entered if the car's battery has been disconnected or if the radio has been removed from the car. Please refer to the security release procedure.
In Car Entertainment Contents This handbook contains all the information you will need to operate the in-car entertainment equipment fitted in your Holden car. It is recommended that you read this handbook as this will greatly assist in obtaining the best performance from your system. In Car Entertainment ............................................ 2 There are also sections on radio reception and care and maintenance of your CD's. We wish you many hours of pleasurable listening. Tone Control .........
Overview = [1] - [6] Memory Preset stations 1 to 6 Steering Wheel Mounted Remote Controls (if fitted) Controls > - Volume control: Turn Audio menu: Push (Bass / Treble / Fader / Balance selector) No. Symbol Function No.
Switching on/off Volume Control Balance On/Off (using ignition key) Volume When the car's ignition is switched off and the key removed, the radio (if operating) will be switched off. When the ignition is switched on again the radio will also be switched on. Turning the knob > clockwise will increase the level, turning it anticlockwise will decrease the level. To shift the sound towards the right or the left press the audio selector (Volume knob) four times, to select the Balance mode.
Treble Press the audio selector (Volume knob) twice, to select the Treble mode. This will be confirmed on the display by 'TREBLE' with the current setting. While in this mode, turn the selector knob clockwise or anticlockwise to adjust the treble to the desired level. After 2 seconds the display will return to the former mode. Radio Automatic Seek Tuning Selecting Waveband AM Band: Press AM/FM button 9 to select AM band.
Manual tuning To tune-in stations of which the frequency is known, press and hold one of the tuning buttons TUNE> ; or ; or
You can also store stations manually on the AS storage locations (see 'Storing a Radio Station into a Preset' elsewhere in this handbook). Range: AM broadcasts tend to follow the earth's curvature and also reflect from the upper atmosphere, in which enables long range reception, especially after sunset. Recalling Stored Stations FM transmissions are basically line-of-sight (similar to TV signals) and are reflected by buildings, mountains etc., but not by the upper atmosphere.
To reduce the effects of interference and/or poor signal strength, several features have been included within the radio which work automatically when needed: • Noise Blanking Circuit (FM interference suppression) - To reduce pulse interference, a Noise Blanking Circuit is included. • Soft Muting Circuit - The built-in Soft Muting Circuit will reduce the FM stereo separation and treble response if the signal from the radio station diminishes.
Track Scan Random Play Press the TR SCN button 3 to sequentially sample the first 10 seconds of all tracks on the CD. During the track scan the display shows: When this feature is selected, all tracks on the CD will be played randomly. TRACK DISC IN 10 SCAN To switch on the random play, press TR RDM button 5 during CD playback. Random play will be confirmed by the following display: TRACK 12 The track number is flashing.
4. 'CD ERROR' (after CD loading): CD cannot be read anymore; after displaying 'CD ERROR' the radio ejects the CD. Check if CD was loaded upside down (the label surface should be facing upwards). This message may also be displayed if a CD is dirty or scratched. Inspect the CD surface for problems and clean if necessary. "CD ERROR" will also be seen when try to play e.g. MP3 CD, Video CD, DVD or CD-ROM. The radio switches back to radio mode.
Steering Wheel Mounted Remote Controls (if fitted) To increase driving safety and to improve ease of operation, some of the radio functions can be controlled by the remote controls on the steering wheel. The following functions are available (for illustration see fold-out page): Overview No.
Audio Menu Adjustment Additional Features Press the volume control > to activate and select audio menu. Speed dependent volume control When any of the audio menu (Bass/Treble/ Fader/Balance) is on the display, you can select the next menu by pressing the button O E once or as many times as required. Increase or decrease the setting by pressing the button + C or - D. The speed dependent volume control adjusts the volume depending on the vehicle speed.
Confirmation Beeps Audible beeps are used to confirm various actions of the radio such as storing a radio station or an automatic store is started. The beeps can be turned on or off as follows. 1. Switch off the radio by pressing button ON :. 2. Press preset buttons 3 and 5 (=) together and keep pressed. 3. Switch on the radio and keep preset buttons 3 and 5 (=) pressed until the display shows 'BEEP OFF' or 'BEEP ON'. 4. Select 'BEEP ON' or 'BEEP OFF' with the tuning buttons (;). 5.
Master Reset The radio has a reset function built in to enable you to instantly reset all adjustment to the factory standard. This feature is most useful when adjustments have been made that affect the sound quality or operation of the radio and you are unsure of how to return the original neutral settings. Master Reset will reset the followings: • Bass, Treble, Fader, Balance to standard • Volume • Confirmation Beeps • Phone volume Performing the Master Reset 1. Turn off the radio. 2.
NOTES: 15
NOTES: 16
Please note, that all information, illustrations and specifications in this Handbook are based on the latest production information available at the time of printing. Holden reserves the right to make changes at any time without notice and without incurring any obligation. © 2002 Holden Ltd. Reproduction in whole or in part is prohibited without written approval from Holden Ltd., ABN 84 006 893 232.
U1E Holden Part No: 92057925 Bosch Part No: 8 622 403 494 6
