Operating instructions

18
External audio/video sources
AV-IN socket
This device features an external AV input for audio and
video playback. The AV-IN socket is located under the
cover at the front of the device.
Danger!
Increased risk of injury from connector.
In case of an accident, the protruding connec-
tor in the AV-IN socket may cause injuries. The use of
straight plugs or adapters leads to an increased risk of
injury.
쏅 Start the AV-IN mode with the button  AV-IN .
The display shows the audio or video playback of the
AV source.
Video input
This device features a video input at the rear of the device
for connecting a camera that is available as an option. If a
camera is connected, you can display the camera image.
쏅 In the main menu, press the  Camera  button.
External audio/video sources | External monitor | Sound settings
External monitor
This device features an output for connecting an external
monitor for the rear area of the vehicle (see Connection
diagram at the end of these instructions).
쏅 Select the desired source via the main menu and
start the  lm playback, e.g. from a DVD.
The  lm is displayed on the monitor of the device.
쏅 Call up the main menu.
쏅 Press the 
 button.
The  lm is also displayed on the external monitor.
Sound settings
Volume distribution (fader/balance)
You can adjust the volume distribution in the vehicle
for all sources.
쏅 In the main menu or on the control bar of the current
audio source, press the 
 button.
The equalizer menu is displayed.
쏅 Press the 
 button.
The menu for fader and balance is displayed.
쏅 Adjust fader and balance with   /   or
  /  .
쏅 Next, press 
.
The setting is stored, the current source is displayed
again.