Operating instructions

19
Sound settings | Basic settings
Equalizer
You can adjust the equalizer for all sources.
쏅 In the main menu or on the control bar of the current
audio source, press the 
 button.
The equalizer menu is displayed.
쏅 Select a preset equalizer via the buttons.
- Or -
쏅 Press the  User  button to adjust the level of the
available frequency bands according to your prefer-
ences.
Note:
With the [ Reset ] button, you can reset the custom-
ised setting again.
- Or -
쏅 Press the  Flat  button for a linear sound playback.
쏅 Press the  Loudness  button to switch increasing
the bass at low volume on or o .
쏅 Next, press 
.
The setting is stored, the current source is displayed
again.
Basic settings
In the settings menu, you can adjust the basic settings
for the di erent functions of the device to your require-
ments.
쏅 In the main menu, press the [ Settings ] button.
The settings menu is displayed, the General sub-
menu is activated.
쏅 Call up the submenus with the buttons in the lower
area of the settings menu.
General
The following settings are possible:
Radio region – Select the reception region for the radio
reception.
Blackout – If this value is set, the display of the radio is
completely switched o after 10 or 20 sec. without use.
Dimmer mode – Adjust the display brightness
Beep – Switch con rmation beep on/o
TFT calibration – The touchscreen can be calibrated
here.
SWC – The buttons of a connected steering wheel con-
trol can be con gured here.
Software version – Display of the current software ver-
sion.
Load factory settings – Resets all personalised settings.
Video
The following settings are possible:
Set password – De ne a password if you want to use the
parental controls.
Rating level – The rating of DVDs can be de ned here.
If set to "Adult", all movies can be played back. If a pass-
word was con gured, the rating level can be changed
only with the password