Operation Manual

Customer service en
25
Replacing the bulb in the oven ceiling light
If the bulb in the oven light fails, it must be replaced.
Heat-resistant, 25 watt, 230 V halogen bulbs are
available from the after-sales service or specialist
retailers. When handling the halogen bulb, use a dry
cloth. This will increase the service life of the bulb. Only
use these bulbs.
:Warning – Risk of electric shock!
Switch off the circuit breaker in the fuse box.
1. Place a tea towel in the oven when it is cold to
prevent damage.
2. Remove the glass cover. To do this, press the metal
tabs to the side with your thumb (Fig. A).
3. Pull out the bulb (do not turn it ) (Fig. B). Insert the
new bulb, making sure that the pins are in the
correct position. Push the bulb in firmly.
4. Refit the glass cover. When doing this, insert it on
one side and press firmly on the other side. The
glass cover will click into place.
5. Remove the tea towel and switch on the circuit
breaker.
4Customer service
Cu s t o mer ser vi ce Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an
appropriate solution, also in order to avoid after-sales
personnel having to make unnecessary visits.
E number and FD number
When calling us, please give the product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
containing these numbers can be found on the right-
hand side of the oven door. You can make a note of the
numbers of your appliance and the telephone number
of the after-sales service in the space below to save
time should it be required.
Please note that there will be a fee for a visit by a
service technician in the event of a malfunction, even
during the warranty period.
After-sales contact details for all countries can be found
in the attached after-sales service directory.
%$
E no. FD no.
After-sales service O