Operating Instructions and Installation Instructions

20
Removing metal grease filter
1. Open the lock and fold down the metal grease filter. While
doing this, place your other hand under the metal grease
filter.
2. Take the metal grease filter out of the holder.
Notes
■ Fat may accumulate in the bottom of the metal grease filter.
■ Hold the metal grease filter level to prevent grease from
dripping out.
3. Clean the metal grease filter.
On appliances with a glass plate in the filter pull-out:
■ The glass plate can be removed easily and can be cleaned in
the dishwasher.
■ To remove it, carefully lift the glass plate.
Installing the metal mesh grease filter
1. Insert the metal mesh grease filter.
While doing this, place the other hand under the metal mesh
grease filter.
2. Fold the metal mesh grease filter upwards, locking it in place.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
: Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
Malfunction table
--------
Problem Possible cause Solution
The appliance
does not work
The plug is not
plugged in.
Connect the appliance to
the electricity supply
Power cut Check whether other
kitchen appliances are
working
Faulty fuse Check in the fuse box to
make sure that the fuse for
the appliance is OK
The lighting
does not work.
The bulbs are
faulty.
For information on chang-
ing the bulbs, see the
"Replacing Bulbs" section.