Operating Instructions and Installation Instructions

Building in

• Do not hold or carry the appliance by the door handle. The door handle cannot hold the

weight of the appliance and may break off.

1. Carefully push the microwave into the box, making sure that it is in the centre.

2. Open the door and fasten the microwave with the screws that were supplied.

Fully insert the appliance and centre it.

Do not kink the connecting cable.

Screw the appliance into place.

The gap between the worktop and the appliance must not be closed by add tional battens.

Electrical connection

The appliance is tted with a plug and must only be connected to a properly installed earthed

socket.

Only a qualied electrician who takes the approriate regulations into account may install the

socket or replace the connecting cable. If the plug is no longer accessible following installation,

an all-pole isolating switch must be present on the installation side with a contact gap of at least

3 mm. Contact protection must be ensured by the installation.

Fuse protection: see instructions for use-technical data.

* 20 mm for metal fascias

Important Information