Operating Instructions and Installation Instructions

36
Setting the cooking time
The cooking time for your meal can be set on the oven. When
the cooking time has elapsed, the oven switches itself off au
-
tomatically. This means that you do not have to interrupt other
work to switch off the oven. The cooking time cannot be acciden
-
tally exceeded.
The oven starts. The cooking time counts down in the display.
The cooking time has elapsed
An audible signal sounds. The oven stops heating.
Childproof lock
The oven has a childproof lock to prevent children switching it on
accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been switched on.
Switching on the childproof lock
Requirement: No cooking time should be set and the function
selector is in the off position.
Touch and hold the
key for approx. 3 seconds.
The symbol
appears in the display. The childproof lock is
activated.
Setting the clock
Once the appliance is connected, „00:00“ will blink, buzzer will
ring once. Set the clock.
1.
2.
Touch „– +“ key
between 00:00 and 23:59
Touch the
key.
1.
The time is set.
Changing the clock
Touch and hold the
key for 3 seconds in waiting state.
The actual time disappear and then the time will blink in
the display.
2.
Touch „– +“ key to set the new time and touch the key
to comrm the setting.
Switching off the childproof lock
Touch and hold the key for approx. 3 seconds.
The symbol
on the display goes out. The childproof lock is
deactivated.
Childproof lock with other cooking operations
When other cooking programmes have been set, the childproof
lock is not operational.
Memory Function
Setting the memory function Using the memory function
1. 1.
When nish cooking setting but don‘t touch key, touch key
to enter memory cooking mode. The cooking time and current
memory segment will display alternately in the screen. Others
retain original setting.
2.
3.
Touch key once again to choose memory N1-N3 procedure.
The screen will display N1, N2, N3 alternately. When nish
choice, stop pressing.
4.
Touch key to start memory cooking. If no need, touch key to
cancel and the screen return to display cooking time.
If the current memory segment was already memory cooking,
the previous memories will be covered when you memory at this
segment again.
Quick Start
In waiting state, touch key, the screen will display the cooking
program you have set. The cooking time and memory segment will
display alternately. If no memory segment you have set, it will display
the current memory sogment.
2.
3.
Touch key again to choose memory N1-N3 procedure. The
screen will display N1, N2, N3.
Touch
key to start memory cooking.
1. In waiting state, touch key to start 30 seconds‘ cooking with
900W microwave power.
During cooking (except Auto Cook and Defrost), each added
touch of
key can increase 30 seconds cooking time up to the
corresponding MAX. cooking time.