User Manual

20
Tuner mode
Band: The Band menu allows selecting
the waveband or the memory bank.
You can switch between the menus with
the rocker switch
or :.
Setting the waveband/ memory
bank
You can adjust and set radio stations of the
FM and AM wavebands.
The FM and AM wavebands each feature 2
memory banks: FM and FMT as well as AM
and AMT. Each of the 4 memory banks fea-
tures 10 memory locations.
Press the
rocker switch : twice to
open the "Band" menu.
Press the rocker switch
or : to
select the desired waveband or memo-
ry bank.
Press the OK button
2.
The desired waveband or memory bank is
adjusted. After a short period of time, the
display automatically returns to the "List"
menu.
You can now perform the following actions
in this waveband/memory bank:
Tuning into a station
Storing stations
•
쏅
쏅
쏅
•
•
Tuning into a station
There are 3 ways of tuning into a station :
Tuning into stations automatically
(station seek tuning)
Tuning into stations manually
Selecting stored stations
Station seek tuning
Press the # button of the alphanumer-
ic keys
9.
"SEEK" and the current frequency appear
on the display.
Press the rocker switch
or :.
If you press and hold the rocker switch
or
:, automatic seek tuning skips the
stations found until you release the rocker
switch again.
Note:
You can also activate the "SEEK" func-
tion by using the
rocker switch : to
open the "Tune" menu and pressing the
OK button
2.
The tuner searches for the next receivable
station in the current waveband. The ad-
justed sensitivity of the station seek tuning
(section "Changing the seek tuning sensitiv-
ity") is taken into consideration.
Tuning into stations manually
Press the # button of the alphanumer-
ic keys
9.
"SEEK" and the current frequency appear
on the display.
•
•
•
쏅
쏅
쏅
01BA_HamburgMP68us_gb.indd 2001BA_HamburgMP68us_gb.indd 20 14.03.2008 10:48:51 Uhr14.03.2008 10:48:51 Uhr