User Manual

22
Tuner mode
Changing the seek tuning
sensitivity (SENS )
The seek tuning sensitivity determines
whether the automatic station seek tuning
locates only strong stations or also weaker
stations. You can adjust the seek tuning sen-
sitivity separately for the FM and AM wave-
bands.
Select the waveband for which you want
to set the seek tuning sensitivity.
Press the MENU button
6.
The Tuner menu opens. The "SENS" func-
tion is selected.
Press the OK button
2.
Press the rocker switch
or : to ad-
just the sensitivity between "SENS LOW
1" (lowest sensitivity) and "SENS HIGH
6" (highest sensitivity).
Press the OK button
2 to select a dif-
ferent function, or press the DIS•ESC
button
; to exit the menu.
Scanning all receivable stations
(BANDSCAN )
You can scan all receivable stations of a
waveband. The scan time can be set as de-
scribed in the chapter "User settings".
Select the waveband (FM, AM) whose
receivable stations you want to scan.
Press the
rocker switch : to open
the "Tune" menu.
The "SEEK" function is selected.
Press the rocker switch
or : to
select the "BANDSCAN" function.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
"BAND SCAN" briefl y appears on the dis-
play.
Press the OK button
2.
"SCAN" and the current frequency appear
on the display.
The tuner is searching for stations. As soon
as the tuner has located a station, it is
played.
To continue listening to the currently
scanned station,
press the OK button
2.
After a complete search of the frequency
band, scanning stops. The previously set
station is played.
쏅
쏅
01BA_HamburgMP68us_gb.indd 2201BA_HamburgMP68us_gb.indd 22 14.03.2008 10:48:53 Uhr14.03.2008 10:48:53 Uhr