Radio / CD Acapulco CD51 Operating instructions
SVENSKA NEDERLANDS ITALIANO 3 5 16 15 7 14 13 8 ESPAÑOL 1 4 PORTUGUÊS 2 FRANÇAIS 6 9 12 11 10 3 ENGLISH DEUTSCH
8 > ? @ ENGLISH FRANÇAIS = ITALIANO 6 7 < NEDERLANDS 5 : ; button for opening the fliprelease panel Arrow buttons OK button to confirm menu entries and start scan function DEQ+ button (Digital Equalizer) to switch equalizer on/off AUD button (Audio) for adjusting bass, treble, balance and fader LD switches loudness function (hearing-weighted volume adaptation) on/off Buttons 1 - 6 TRAF button (Traffic) to switch traffic news reception on/off CD•C button for choosing between CD, CD-changer (if conn
TABLE OF CONTENTS Notes and Accessories .......... 35 Road Safety .................................. 35 Fitting ............................................ 35 Accessories .................................. 35 Release Panel ........................ 36 Switching On and Off ............. 37 Volume Adjustment ................ 38 Setting Switch-On Volume ............. 38 Immediate Volume Reduction (Mute) 38 Adjusting Muted Volume ................ 38 Telephone Audio/Navigation Audio . 38 Automatic Sound .......
Fitting If you want to fit your car radio yourself, read the fitting and connecting instructions at the end of this guide. Subwoofer You may connect an active bass loudspeaker (subwoofer) to your device. This is done using a Blaupunkt connection cable (Blaupunkt No.: 7 607 609 093) available from your accessory dealer. For further information, please consult the installation guide at the back of this guide. 35 ENGLISH FRANÇAIS CD Changers ITALIANO Amplifiers Any Blaupunkt amplifier can be used.
RELEASE PANEL button 1. Release Panel ➮ Press the Theft Protection The panel unlatches. Your device has a removable flip-release panel to protect it from theft. Without this panel, the unit is of no value to a thief. Protect your device from theft by taking the release panel with you whenever you leave the vehicle. Do not leave the panel in the car, even in a hidden place. The release panel is designed for easy handling. Note: ● Do not drop the panel.
➮ Press button 3. Note: To protect the vehicle battery, the device is automatically switched off after one hour if the vehicle ignition is off. button 9. The flip release panel opens. ➮ Push the CD gently into the device, printed side up, until you feel it stop. The CD is then automatically drawn into the device. While the CD is being drawn in, do not push or pull it. ➮ Close the panel with a gentle push until it locks. The device switches on. The CD starts playing.
VOLUME ADJUSTMENT Volume Adjustment The volume can be adjusted in steps from 0 (off) up to 66 (maximum). ➮ To increase the volume, turn the volume control 2 to the right. ➮ To reduce the volume, turn the volume control 2 to the left. Setting Switch-On Volume ➮ Press the MENU button 8. ➮ Press the button : until “ON VOLUME” appears in the display. Immediate Volume Reduction (Mute) You can reduce the volume immediately (mute) to a pre-set level. ➮ Press button 3 briefly. “MUTE” appears in the display.
Automatic Sound This function adjusts the volume of your car radio automatically to your driving speed. This requires your device to be connected as described in the installation guide. The automatic volume booster can be set in six stages (0-5). ➮ Press the MENU button 8. 39 ENGLISH FRANÇAIS ITALIANO With certain functions, if you hold a button pressed for longer than 2 seconds (e.g. when saving a station frequency on a station button) a confirmation tone (or beep) is heard.
RADIO OPERATION Radio Operation Switching REG On / Off This device is equipped with an RDS radio receiver. Many FM stations transmit an additional signal containing extra information such as station name and program type (PTY). As soon as it can be received, the name of the station is shown in the display. ➮ Press the MENU button 8. ➮ Press the button : until Switching on Radio Operation If the current operating mode is CD, CDchanger or AUX ➮ Press the BND/TS button 5.
or button :. The next station that can be received is tuned in. Manual Station Tuning To tune to a station manually ➮ Press the or button :. Note: Manual station tuning is only possible when the RDS convenience function is switched off. Browsing a chain of stations (FM only) If a station provides several programs, it is possible to browse through this “chain” of stations. or button : to change to the next link in the station chain.
RADIO OPERATION Saving Stations Automatically (Travelstore) Stop SCAN, continue listening to a station You can also save the six strongest stations in the area automatically (FM only). The stations are saved on the FMT memory level. ➮ Press the OK button ;. The scanning process is stopped, and the last station tuned in plays. Note: Any stations previously saved on this level will be deleted. Setting Scan Time ➮ Press the MENU button 8.
RADIO OPERATION to change the program type stored for that button. The selected program type is briefly displayed. Switching PTY On / Off ➮ Hold down the desired station but- ➮ Press the MENU button 8. ➮ Press the button : until “PTY ON” or “PTY OFF” appears in the display. or button : to start the search. The next station with the selected program type is tuned in. ➮ Press the Storing program types on station buttons ➮ Select a program type with the or button :.
RADIO OPERATION Optimising Radio Reception Treble cut in the presence of interference (HICUT) The HICUT function improves the sound when radio reception is poor (FM only). When interference is being experienced, the treble is automatically cut, which therefore also reduces the level of interference. Switching HICUT On / Off ➮ Press the MENU button 8. ➮ Press the button : until “HICUT” appears in the display. Switching SHARX On / Off ➮ Press the MENU button 8.
This device is equipped with an RDS EON receiver. EON means Enhanced Other Network. Whenever a traffic announcement (TA) is made, the radio switches automatically from a station that does not broadcast traffic information to one in the chain of stations that does. After the traffic announcement, the device returns to the station that was previously tuned in. or button : to switch between “AM ON”, “AM OFF”, “MW OFF” and “LW OFF”. ➮ Press the ➮ Press the MENU button 8 or OK ;. You settings are saved.
TRAFFIC INFORMATION Adjusting the Volume for Traffic Announcements ➮ Press the MENU button 8. ➮ Press the button : until CD OPERATION CD Operation This device can be used to play standard CDs with a diameter of 12 cm. Danger of damage to CD drive! This device is not suited for playing so-called CD singles (8 cm diameter) or shaped CDs. No liability will be accepted for damage caused to the CD drive by unsuitable CDs. “TA VOLUME” appears in the display. ➮ Use the buttons : to adjust the volume.
Playing Tracks in Random Sequence (MIX) ➮ Press button 5 MIX >. “MIX CD” appears briefly in the display and the MIX symbol shows. The next track is played at random. ton ;. The track currently being sampled will continue to play. Repeating Tracks (REPEAT) ➮ To repeat a track, press button Ending MIX 4 RPT >. “REPEAT TRCK” flashes up and the RPT symbol shows. The track is repeated until RPT is deactivated. ➮ Press button 5 MIX > again.
CD OPERATION Traffic Announcements in CD Mode ➮ To receive traffic announcements ➮ To save the name, press the while listening to a CD, press the TRAF button ?. Traffic information priority is activated when the traffic jam symbols shows in the display. For more information, please read the section on “Traffic Information”. ➮ Start playing the CD whose name Naming CDs ➮ Press the or button :.
the or times. button : one or more Selecting a Track ➮ To change to a different track on track or CD, press button 4 RPT > until “REPEAT OFF” flashes up and RPT disappears from the display. Playing Tracks in Random Sequence (MIX) ➮ To play the tracks of the current CD Fast Search (Audible) To search rapidly backwards or forwards ➮ To play the tracks of all the CDs in ➮ Hold down one of the the CD changer in random sequence, press button 5 MIX > again.
CD CHANGER OPERATION Ending MIX function Naming CDs ➮ Press button 5 MIX > until In order to recognise your CDs more effectively, the car radio allows you to give individual names to up to 99 CDs. The names may have up to seven characters. If you attempt to assign more than 99 names, the display will show “FULL”. “MIX OFF” flashes up and “MIX” disappears.
OK button ;. Deleting all CD names To delete all stored CD names: ➮ Start listening to a CD. ➮ Press the MENU button 8. ➮ Use the or button : to select “CDC NAME”. ➮ Press the or button :. ➮ Hold down the MENU button 8. After 4 seconds a beep is heard and “DELETE NAME” appears in the display. Continue to hold the MENU button 8 until a second beep is heard and “DELETE ALL” appears in the display. ➮ Release the MENU button 8. All CD names in the CD changer have been cleared.
CLOCK TIME or button : to switch the display between ON and OFF. The time is shown in the display. The minutes are flashing, and can be adjusted. ➮ Press the ➮ Set the minutes with the ➮ When the setting process is com- or button :. ➮ Having set the minutes, press the button :. The hours flash. ➮ Set the hours with the or button :. ➮ Press the MENU button 8 or OK ;. “MENU” appears in the display. button : until “24H MODE” or “12H MODE” appears in the display. ➮ Press the or switch modes.
TONE AND VOLUME CONTROLS “BASS” appears in the display. ➮ Press the or just the bass. button : to ad- ➮ When the setting process is complete, press the MENU button 8 or OK ;. Adjusting the Treble ➮ Press the AUD/LD button =. “BASS” appears in the display. button : until “TREBLE” appears ➮ Press the ➮ Press the or just the treble. plete, press the MENU button 8 or OK ;. Adjusting the Fader ➮ To adjust the fader, press the AUD/ LD button =. “BASS” appears in the display.
LOUDNESS EQUALIZER Switching Loudness On / off Loudness refers to boosting the bass and treble at low volume levels to match the ear’s sensitivity. ➮ Press the AUD/LD button = for about 2 seconds. If loudness is switched on, LD shows in the display. Setting Loudness Intensity The loudness boost can be set in steps from one to six. ➮ Press the MENU button 8. “MENU” appears in the display. button : until “LOUDNESS” appears in the display. ➮ Press the ➮ Press the or just the boost.
“AUTO DEQ+”. buttons : to enter USER mode. ➮ Use the or button : to choose between “USER 1”, “USER 2” and “USER 3”. ➮ Use the ➮ Hold the DEQ+ button < pressed for longer than 2 seconds. or OK ;. Adjusting Sound Measurements Manually To change the settings for USER 1 USER 3 manually: ➮ Press the DEQ+ button <. ➮ Use the or button : to select “AUTO DEQ+”. buttons : to activate USER mode. ENGLISH FRANÇAIS ITALIANO ➮ Briefly press the DEQ+ button < NEDERLANDS position inside the vehicle.
EQUALIZER or button : to set the frequency level. ➮ Use the ➮ To select the next filter, press first OK ; and then one of the buttons :. ➮ When all settings are complete, press the DEQ+ button <. Setting Digital Equalizer In addition to automatic sound measurement, you can also make manual settings using the 5-band parametric equalizer. In this case, parametric means that in each of the five filters, one individual frequency can be emphasised or reduced (with a gain of +8 to -8).
EQUALIZER DEUTSCH Equalizer Adjustment Guide Tone lacks depth, is aggressive, no stereo effect. Reduce middle tones Frequency: 1,000 to 2,500 Hz Level: -4 to -6 Muffled tone Lack of clarity Instruments have no brightness Boost the treble range Frequency: approx. 12,500 Hz Level: +2 to +4 FRANÇAIS Reduce lower middle tones Frequency: 125 to 400 Hz Level: approx.
EQUALIZER Selecting Sound Presets Selecting spectrometer type It is also possible to activate pre-programmed equalizer settings for the following types of music: ● CLASSICS ● POP ● JAZZ ● ROCK ● TECHNO ● SPEECH To activate pre-programmed settings for these types of music: ➮ Press the MENU button 8. ➮ Press the DEQ+ button <. ➮ Press the or button : until “SOUND PRESET” appears in the display. buttons : to select the desired preset. ➮ Use the ➮ Press the DEQ+ button < or OK ;.
Switching AUX Input On / Off ➮ Press the MENU button 8. “MENU” appears in the display. button : until “AUXIN-1 OFF” or “AUX-IN-1 ON” appears in the display. For the second AUX input, the “1” is replaced by a “2”. If a CD changer is installed, “2” is the only option. ➮ Press the DEUTSCH ENGLISH FRANÇAIS TMC means “Traffic Message Channel”. TMC is used to transmit traffic announcements digitally for use in route planning by suitable navigation systems.
TECHNICAL DATA GUARANTEE Technical data Guarantee Amplifier The extent of the guarantee depends on the statutory conditions applicable in the country where the device was bought. If there should be a fault in your device, please refer to your dealer, providing proof of purchase. If the statutory minimum guarantee period in your country is less than 12 months, Blaupunkt provides a 12 month manufacturer’s guarantee.
