ACD 9850 1 ACD 9850 PORTUGUÊS ESPAÑOL Operating instructions SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
PORTUGUÊS ESPAÑOL ACD 9850 NEDERLANDS ITALIANO 2 3 4 12 11 10 9 8 7 6 SVENSKA 1 FRANÇAIS 5 3 ENGLISH
Anti-theft coding ........................... 19 Entry of a wrong code number .............. 19 Switching the code system on .............. 20 Restart following an interruption of the power supply ......................................... 20 Switching the code system off .............. 20 Switching the code-LED on/off .............. 20 The Loudness function .......................... 25 Summary of default settings made at the factory ...................................................
Short instructions 1 On/Off Turn button. On Off To adjust the volume: Turn button. To alter a setting: Press AUD briefly until the abbreviation of the desired mode and the corresponding value appear in the display. 2 LD / AUD LD - Loudness When listening at a low level, the Loudness function will create a more natural sound by boosting the bass frequencies. To switch the Loudness on/off: Press AUD until “LOUD ON” or “LOUD OFF” is displayed.
Extra function: To adjust the traffic message and warning beep volume. Extra functions: REG ON / REG OFF - With REG ON the system will only switch to an alter17 ACD 9850 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS 9 AF (Alternative Frequency during RDS operation) When “AF” lights up in the display, the radio will automatically search for a frequency offering better reception of the same RDS program. To switch AF on/off: Press AF briefly.
; Code-LED May flash for additional theft protection when the car radio is switched off. : Display Radio operation a < c Station tuning – automatically, if “AF” lights up in the display. – manually, if “AF” is off. 9 AF.
Entry of a wrong code number It should not be possible for a thief to find out the correct code number by a simple trialand-error operation. This is why the set will be blocked for a certain period of time after a wrong code number was entered. The display will then show “- - - -”. The waiting time is 10 seconds after the first three attempts and one hour following subsequent trials. After 19 unsuccessful attempts the display will show “OFF”, making it impossible for you to restart the unit.
Note: Keep your car radio passport including the code number in a safe place in order to avoid “unauthorised access” to your car radio. If the power supply to the unit is interrupted while the code system is switched on, you need to know the right code number. The radio will function again as soon as you have entered the correct code.
The AF (Alternative Frequency) function makes sure that the strongest frequency of the currently selected program is always tuned in automatically. This function is activated when “AF” appears in the display. In order to switch this function on or off, • press the AF button briefly. While the radio is searching for the strongest reception signal, it will switch to mute briefly.
If you leave the service area of the regional program tuned into, or if you would like to take advantage of the full RDS service, then switch to “REG OFF”. • Press the AF button for approximately 2 seconds until “REG OFF” appears. If REG ON is activated, “REG ON” will appear in the display briefly each time the radio is switched on. Selecting a station With this car radio you can receive FM stations between 87.5 and 108 MHz.
DEUTSCH Changing the memory bank Automatically storing the stronYou can shift between the memory banks I, II gest stations with Travelstore Select a station with the rocker buttons (either automatically or manually). • Press the desired preset button until the radio resumes play after the muting or until you hear a BEEP. Now the station has been stored. The activated preset button is indicated in the display.
Receiving traffic information stations with RDS-EON Many FM broadcasters provide their service area with traffic messages at regular intervals. All traffic program stations transmit a special telegram signal alongside their programs, which your car radio can evaluate. If this signal is identified, “TP” will appear in the display (Traffic Program).
• Press the / SRC button for more than 2 seconds. The disc will be ejected. To protect the CD mechanism, the automatic insertion or ejection of the disc must not be impaired in any way. Selecting a track The activated CD functions will appear in the display as soon as the disc is inserted. buttons to select the desired Use the title. = To skip titles. • = To repeat titles. button only once, CD When pressing the playback will start at the beginning of the currently played track.
Appendix Summary of default settings made at the factory LOUDNESS S-DX S-LO LED 3 2 2 ON Specification Amplifier Output power: FM Sensitivity: 4 x 19 watts RMS power acc. to DIN 45324 4 x 20 watts max. power acc. to DIN 45324 0.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL Bosch Gruppe 1/95 K7/VKD 3 D95 162 001 PM 15 ACD 9850 PORTUGUÊS Blaupunkt-Werke GmbH
