ACR 3250 1 ACR 3250 PORTUGUÊS ESPAÑOL Operating instructions SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
PORTUGUÊS SVENSKA NEDERLANDS ITALIANO FRANÇAIS 1 ACR 3250 2 3 = < ; : 9 8 ENGLISH 5 6 7 ESPAÑOL 4 3
Anti-theft protection ..................... 16 Entry of a wrong code number .............. 16 Switching on security coding ................. 17 Re-start following an interruption of the power supply ......................................... 17 Switching off security coding ................. 17 CODE LED ............................................ 17 DEUTSCH Mechanism/cassette tapes ................... 21 Specifications ........................................ 22 FRANÇAIS Precautions ....................
Short instructions 1 On / Off: Turn the knob. On Off To adjust the volume: Turn the knob. 2 TONE – audio To adjust the BASS TREBLE (treble control) To alter a setting: Toggle the TONE button until the corresponding abbreviation and the adjusted value appear in the display. Use the buttons to alter the selected setting. The adjusted value is indicated in the display. The last setting will be stored automatically.
lo AF TP TA Station abbreviation or frequency Waveband Memory bank (I, II, or Travelstore) Preset buttons (1 - 6) Stereo Seek tuning sensitivity Alternative RDS frequency You are listening to a traffic programme station. - Priority for traffic programme stations DEUTSCH ENGLISH FRANÇAIS - = Code LED Flashes for additional theft protection when the ignition has been switched off.
Important notes Anti-theft protection Precautions Installation/Connection Before starting to use your new car radio, please read the information on “Traffic safety” and “Anti-theft protection” carefully. If you would like to install this equipment yourself or add any new components, please carefully read the installation and connection instructions following the appendix. Do not ground the loudspeaker outputs! Use only the accessory and replacement parts approved by Blaupunkt.
Press buttons AF and > simultaneously and hold down. • Turn on the radio. The display shows “CODE”. • Briefly press the FM button; the display shows “0000”. • Turn on the radio. The display shows “CODE”. • Enter the code number given in the Blaupunkt car radio passport. Example: The code number is 2521. - Press the FM button twice; the display shows “2000”. - Press the AF button five times; the display shows “2500”. - Press the TA button twice; the display shows “2520”.
Radio operation with RDS (Radio Data System) The Radio Data System offers you more convenience when listening to FM radio stations. More and more radio stations have begun to broadcast RDS information alongside their programmes. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the station buttons become programme buttons.
Switching from stereo to mono (FM) • Select the desired preset button (1 to 6) for the new station to be stored using preset buttons 1-6. If reception is poor, you may get better sound quality by switching to mono: • Press the lo·m button until a beep sound is released and the stereo sign disappears from the display. Each time the radio is switched on, stereo playback is activated ( is displayed). The unit will automatically switch to mono if the received signal is not strong enough for stereo playback.
Receiving traffic programme stations with RDS-EON Recalling stored stations You can recall any stored station at the touch of a button. • Select the memory bank by toggling the FM button until the desired level appears in the display. • Press the corresponding preset button until the display shows the desired preset button. Many FM broadcasters offer traffic messages for their service area at regular intervals.
Appendix Automatic seek tuning start Inserting a tape Mechanism/cassette tapes Prerequisite: The priority for traffic announcements has been activated. When leaving the reception area of the tuned in traffic programme station while listening to a tape or after having turned down the volume completely, the system will automatically start searching for a new TA programme. If no such station is found within approximately 30 seconds, tape operation will be stopped and a warning beep will sound.
Specifications Amplifier Output power: FM waveband Sensitivity: 2 x 10 W RMS power acc. to DIN 45324/3.1 into 2 Ω 1.
Blaupunkt-Werke GmbH Bosch Gruppe 14 ACR 3250 dänisch
