Operating instructions ACR4230
1 2 14 3 13 12 4 11 10 9 5 6 7 8 3
Traffic safety ......................................... 11 Installation / Hook-up ............................ 11 Insert cassette tape ............................... 13 Remove cassette tape .......................... 13 Fast forward .......................................... 13 Fast rewind ........................................... 13 Autoreverse function ............................. 13 Care of your audio equipment ............... 14 Station search .......................................
Legend 1 On/off Turn knob. On Off Adjust volume: Turn knob. 2 7 Display for frequency range frequency memory bank ARI priority ARI station code channel preset track (cassette) stereo manual fine tuning sensitivity (station search) - Eject cassette tape 3 Cassette tape slot 4 FR (Fast Rewind): Rewinds tape quickly to the beginning. To switch off: press FF button. 5 PROG (Autoreverse) To switch over to the other tape track press both buttons. 8 6 FF (Fast Forward) Forwards tape quickly to the end.
Manual station search Stereo - mono switch m (manual) must be lit up in the display. If it is not, switch it on by pressing lo • m. press right or left quickly. • The frequency will move up or down in short intervals. If you hold the button pressed, then the frequencies will move up or down more quickly. If you would like to switch between stereo and mono reception: • Press lo • m for approximately 2 seconds. During mono reception the stereo symbol will light up in the display.
Traffic messages (ARI) Storing stations Storing the strongest stations automatically For each memory bank (I, II, III, T) you can store up to five stations using the button 1-5. • Select the memory bank by pressing FM•T. • Select the button 1-5 to store the new station and press it. • to tune in the station you Press want to store (automatically or manually). • Press the button 1-5 and hold it. First the station will be muted and then become audible again.
Press ARI. Automatic search start (during cassette operation) If you should leave the reception area of your ARI station while you are playing a cassette, then the car radio will automatically tune into a different station broadcasting the ARI signal. Remove cassette tape • Press The cassette will be ejected. ENGLISH Press FF (fast forward). At the end of the tape, the tape will switch to the opposite track and start playing. Stop fast forward • Press FR.
Appendix Care of your audio equipment Technical data We recommend that you use only C60/C90 cassette tapes in your car radio. Protect your cassettes from dirt, dust and temperatures exceeding 50 °C. During cold weather, allow cold cassettes to warm up somewhat before playing them in order to avoid uneven tape transport. Operating problems and sound distortions may occur after approximately 100 hours of playing time and are caused by dust particles which adhere to the rubber roller pad and the tape head.
DEUTSCH ILLUSTRATIONEN • ILLUSTRATIONS • ILUSTRACIONES • ILLUSTRAZIONI • ILLUSTRATIONER • AFBEELDINGEN L R 182 165 53 ENGLISH 5A 8 601 310 742 L LF RF LR RR R LR LF RR RF FRANÇAIS 150 58,5 5,2-6,3 50 188 Fader Equalizer +12V – ND GR OU PO W AN ER T AC EN C N (IG . + A + NIT (1 IO 2V) N) 5A ITALIANO Amplifier LF RF LR RR +12V +12V L R 5A +12V +12V 8 908 603 223 SVENSKA +12V 8 601 910 002 +12V Kl.
