Operation Manual

14
Pressing << >> enables you to chose the
station.
Changing storage level (FM)
In order to store or call the stored stations,
you may switch between the storage levels
1, 2, and T, as well as AM and AM Travel-
store.
The display will indicate the selected stor-
age level.
• Press the BA key until the display
shows the desired storage level.
Storing stations
By pressing the station keys 1 - 6 you can
store six stations per storage level (1, 2, and
T) in the FM area.
In the AM and the AM Travelstore area you
can also store six stations per storage lev-
el.
• The BA key allows you to choose the
frequency band area.
• Select a station by using the toggle
switch (automatically
/ or manually
<< >>).
• Press the desired station key until the
muted program is audible again (ap-
proximately 2 seconds) or the beeping
stops.
Now the station is stored.
The display shows the stored station.
Automatic storage of strongest
stations with Travelstore
You can automatically store the six strong-
est FM and AM stations of the respective
reception area you are presently in. This
function is particularly useful when you are
traveling.
• Press the BA key for 2 seconds.
The display will show “T-Store”.
The six strongest FM or AM stations will
automatically be stored in storage level T
(Travelstore). When the process is complet-
ed the strongest of the six stations will be
shown in the display and its program will be
audible. You may also store stations in the
Travelstore level by following the instructions
under “Storing stations”.
Calling stored stations
You may call the stored stations by press-
ing the respective keys again.
• Choosing the frequency band area
with the BA key and selecting the de-
sired storage level. Press the BA key
repeatedly until the desired level ap-
pears in the display, then press the re-
spective station key.
Scanning stations with radio
scan
You can briefly scan the stations you are
able to receive.
To turn on scan:
• Press the SC key for 2 seconds.
The display will flash the scanned frequen-
cy or the abbreviated station name. During
the search the display will light up with “FM-
SCAN” or “AM-SCAN”.
If you would like to listen to the scanned sta-
tion for a longer period, you Press the SC
key and thereby terminate the preset scan.
If no station is selected, the scan operation
will be turned off after the search of the fre-
quency band is concluded and the station
you selected prior to the scan function will
be played again.
Changing scan time
You may increase the duration of the scan
process incrementally from 5 to 20 seconds.
Additional information can be found under
“Programming with DSC”.
1.BA Alas,Flori,Neva168 gb 08.06.2000, 12:03 Uhr14