Radiophone / Cassette Amsterdam TCM 127 Operating instructions Amsterdam d 1 1 12.08.
1 2 3 4 5 6 8 7 9 10 11 19 18 17 16 15 13 14 12 12 1 Remote control RCT 07 (optional) 16 17 4 3 2 Amsterdam d 1 2 12.08.
Basic information .................................. 70 Second KeyCard/SIM card ............... 70 Wrong KeyCard ................................. 70 Starting up the Radiophone .................. 70 Resuming equipment operation after the power has been disconnected ... 70 Selecting the language for the display71 Removing the KeyCard/SIM card ......... 71 Train KeyCard/SIM cards ..................... 71 DSC learn mode ................................... 72 Displaying the radio pass data .............
Contents Telephone Operating the telephone .............. 94 Phone book menu ...................... 103 General information .............................. 94 Emergency calls ................................ 94 PIN code (Personal Identification Number) .......... 94 Inserting the SIM card/ entering your PIN code ......................... 94 Reactivating the SIM card .................... 94 Making your first telephone call ............ 95 GSM emergency calls ..........................
Traffic safety General information The telephone function of your Radiophone is based on the GSM radio telephone standard. This standard was developed for use in Europe and many other countries. Using the mobile Radiophone, you can make the same telephone calls as you can with a cellular phone. This assumes that the GSM radio network is available at your location and that you have access privileges and a valid SIM card.
• If otherwise unavoidable: Use only hands-free operation if you have to use the telephone while you are driving. Traffic safety always has the highest priority. Using the telephone in critical areas Always switch off the mobile telephone in areas where it is forbidden to use a mobile telephone or if this equipment could cause electromagnetic interference or otherwise dangerous situations.
If installation conditions are unfavourable, connecting such accessories as a CD changer, an amplifier or infrared remote control may, in rare cases, lead to interference with the operation of the telephone. This may result in interference noise, deterioration of transmission quality or connections being cut off. In this case, please check the wiring or contact one of our authorised service centres.
KeyCard and SIM card Second KeyCard/SIM card KeyCard Basic information One KeyCard is included with the Radiophone. The car radio can also be operated with a second “trained” KeyCard or with one of up to 30 trainable SIM cards. Using the KeyCard it is possible to activate the following operating modes: Radio, tape deck, CD changer (optional), AUX, telephone emergency call. Using the SIM card it is possible to activate all operating modes. The SIM card also incorporates the anti-theft functions.
Press / until “LANGUAGE” appears in the display. • Press DSC/OK and << / >> to select the language. • Press DSC/OK and CL one after the other. Removing the KeyCard/SIM card Never forcibly pull out the card! You may destroy it. • First push the card in gently towards the unit. The KeyCard/SIM card will eject slightly so that you can remove it. • Remove the card. When you remove the card for the first time, “LEARN CARD” will appear in the display.
CEPTED” (i.e. the 23rd SIM card has been trained). The Radiophone can now be operated using the new cards. A maximum of two KeyCards and 30 SIM cards can be trained in this way. If you attempt to program a third KeyCard, the KeyCard which was not part of the programming process will automatically become invalid. If 30 SIM cards have been programmed, it will be necessary to delete old access authorizations before new cards can be trained.
Note: Be sure to read the information in the section on “KeyCard/SIM card antitheft protection system”. Radio Telefon Altering the volume Turn the knob to alter the volume. The setting will appear in the display. When the Radiophone is switched on, it will play at a preset volume (VOLUME FIX). VOLUME FIX can be altered as desired (refer to “Programming with DSC - VOLUME FIX”). The volume can also be altered using the remote control (optional) by pressing V- / V+.
2 / AUD Press AUD once: Alter treble and bass settings using the rocker switch. Treble + Treble – Bass – Bass + Press AUD twice: Alter balance (left/right) and fader (front/rear) settings. Fader front Fader rear Balance left Balance right The settings will be indicated in the display. The last setting made will be stored automatically. Switch off AUD: Press AUD for a third time. If no changes are made for a period of 8 seconds, the AUD setting will end automatically.
Storing radio stations You can use the buttons to store the following number of radio stations for the different wavebands: FM TS (FM-Travelstore) MW LW 19 9 9 9 Tape mode It is possible to set or correct the number of titles to be skipped for SCPS (Super Cassette Program Search) or fast forward. DEUTSCH Switching the regional function on/off: Press AF for approx. 2 seconds (beep), “REGIONAL ON” or “REGIONAL OFF” will appear briefly in the first line in the display.
= MIX / * Radio operation Switch seek-tuning sensitivity: Press button briefly. If “lo” is displayed, the radio will only pick up strong, local stations (normal sensitivity). If “lo” does not light up, the radio will also pick up weaker, more distant stations (high sensitivity). > Display g) lo h) 19/T9 Radio operation a d e f g h i jk l m n i) j) k) Cassette operation b l) CD changer operation (optional) p o MIX CD The tracks of a CD will be played back in random order.
Tape operation Radio Radio operation KeyCard Fast forward Stop this function by pressing the opposite button. Telefon Select title (S-CPS) Forwards Back or ENGLISH For FM only: << / >> Scroll through the station broadcasting network when AF is switched on e.g. NDR 1, 2, 3, 4, N-JOY. / Radio Flashing card tongue If the radio has been switched off and the KeyCard or SIM card removed, the card tongue will flash as additional theft protection if the corresponding setting has been activated.
CD changer operation (optional) A ME Unit: Telephone functions only. Remote control: Select CD Up Down Select track Up: Press briefly. CUE - fast forward (audible): Hold button pressed down. Down: Press two or more times one after the other. Restart the same track: Press once briefly. REVIEW - fast reverse (audible): Hold button pressed down. Additional rocker switch functions: Additional settings possible with AUD 2 DSC mode C The corresponding function must be activated.
The Radio Data System offers you added convenience when listening to FM radio stations. Telephone operation has priority. As a result, you cannot switch to audio mode unless you are not currently talking on the telephone or trying to place a call. • Press SRC repeatedly until the functions of the audio source you wish to listen to appear in the display. You cannot select tape or CD changer operation unless a cassette/magazine containing CDs has already been inserted.
If you wish to continue listening to the first programme, switch REGIONAL ON by • pressing AF/# for approximately 1 second until “REGIONAL ON” appears in the first line. When the regional function has been switched on “REG” will replace “AF” in the display. If you leave the service area of the regional programme you are currently tuned into, or if you would like to take advantage of the full RDS service, switch to “REGIONAL OFF”. • Press AF/# for approximately 1 second until “REGIONAL OFF” appears.
DEUTSCH the individual wavebands: • Select a radio station using the rocker switch (automatically with / or manually with << / >>). • Press the desired selection button for approx. 1 sec. until you hear a beep. If you want to store the radio station on a two-digit preset, • press button 1 briefly and the second button within 2 sec. until you hear a beep. You have now stored the radio station. The station preset will appear in the display.
Recalling stored radio stations Switching from stereo to mono (FM only) You can recall any stored radio station at the touch of a button. • Press BND/TS repeatedly until the desired waveband appears in the display. • Press the corresponding selection button briefly. If you wish to recall a station stored on a two-digit preset (e.g. preset 19) first press 1 and then 9 within the next 2 seconds. Selecting the seek-tuning sensitivity You can alter the automatic seek-tuning sensitivity.
The unit will then switch back to its previous status. The priority for all other traffic messages will remain active. In addition to these, there are also stations which do not actually transmit traffic programmes themselves, but by using RDSEON it is possible to receive the traffic messages broadcast by another traffic programme station in the same radio network. Please note that several buttons have no function while traffic announcements are broadcast.
Operating the cassette deck The equipment must be switched on. Fast forward/rewind As soon as you insert a cassette, the set will automatically switch to cassette operation. Remote control The cassette will not begin to play a) as long as a telephone call is in progress or being placed, or b) as long as a priority traffic announcement is playing. Inserting the cassette • Switch the unit on. • Insert a cassette.
DEUTSCH Tape equalisation Listening to the radio while fast forwarding/rewinding the tape The unit is able to identify the following tape types: iron oxide, chrome oxide or metal; it with RM (Radio Monitor) Switching on/off: • Press . * Noise reduction system manufactured under licence by Dolby Laboratories. The word Dolby and the double-D symbol are trademarks of Dolby Laboratories. Radio Telefon Care instructions You should use only C60/C90 tape cassettes in your car.
CD changer operation (optional) You can use this equipment to conveniently play back CDs with one of the following Blaupunkt CD changers: CDC A06 or A 072 (directly) or CDC-A 05/-F 05/A 071 (with an adapter). The changer is not included with this equipment and can be purchased separately at a retail outlet. Switching CD changer operation on Selecting a track is also possible using the remote control upwards: press briefly CUE - fast forward (audible): hold pressed down.
^ OFF ON ^ Radio ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ Telefon ^ Use the rocker switch / to select the menu item you wish to alter and confirm your selection by pressing OK. ^ ^ ENGLISH ^ Select: ^ ^ ^ ^ ^ If you wish to alter any programming • press DSC/OK. ^ There is an overview of the factory default settings at the end of this section so that you can reset these settings at any time.
You cannot alter the programming for important DSC settings unless you have entered the access code first (refer to the DSC menu item “CHANGE ACCESSCODE”). / << / >> Select function Make setting LOUDNESS Boosts low frequencies for more bass, especially at low volume. LOUD 1 - minimum boost LOUD 6 - maximum boost MASTER RESET This menu item will appear only if a KeyCard is inserted.
LEVEL 1: Linear (no bass, treble, loudness adjustment). LEVEL 2-4: Different settings for volume, bass and treble with loudness switched off. Test the settings to find out which one you prefer. KEYCARD LED You can choose between LED ON or LED OFF. The KeyCard tongue will flash if you select LED ON. It acts as additional protection when the set is switched off and the KeyCard has been removed. LANGUAGE The display texts are available in different languages.
EXTENDED MENU Using this function it is possible to press << / >> to remove the following menu items which are rarely altered. This makes the menu more manageable. OFF – Remove menu items. ON – All of the menu items are available. CARD LIST It is possible to display a list containing all of the valid SIM cards. You can delete individual entries if you wish. The Master-SIM can be deleted with a KeyCard only. WARNING! If the entry is deleted, it will no longer be possible to operate the unit using this card.
DX-LEVEL 1 – high sensitivity DX-LEVEL 3 – normal sensitivity VOLUME FIX Allows you to set the volume at which the unit switches on. Use << / >> to set the desired volume. If “LEVEL +00” is selected, the car radio will switch on at the volume level which was last set before it was switched off. End DSC programming/save changes: • Press DSC/OK. VOLUME FIX TA VOLUME * DEUTSCH MENU PLUS = basic setting The system will reset to MENU after having programmed the first SIM card.
92
Telephone Radio ENGLISH Telefon Radio DEUTSCH Telephone operation 93
Operating the telephone General information Using the Radiophone, you can make the same telephone calls as you can with a cellular phone. Important: You must be located in an area serviced by the GSM radio network and have the access privileges provided by a valid SIM card. This SIM card must be inserted into the unit (refer to the section on “KeyCards and SIM cards” if necessary). Emergency calls The number to dial to place an emergency call in the GSM network anywhere in the world is 112.
Important! When the telephone is ready to operate, an antenna symbol will appear in the display (must not flash). The emergency number in the GSM network is 112 anywhere in the world. Do not use the emergency call number unless there really is an emergency. By dialling 112 you can place an emergency call, regardless of whether or not you have inserted a SIM or KeyCard. When placing an emergency call, be sure to supply all the necessary information as accurately as possible.
Quick reference for using the telephone 1 On/Off The set must be switched on before it is possible to use the telephone. Volume Adjusts the volume while using the “hands-free” function. Adjusts the TA volume while using the “hands-free” function. Adjusts the volume of the current ring tone. 3 SRC (Source) Press SRC briefly: The telephone functions will end and the set will automatically switch back to the audio mode used last (radio, tape deck or optional CD changer). The telephone mode has priority.
< Switches to the telephone mode, answers/ends telephone calls, To start dialling: briefly. Press To switch off the telephone, e.g. in areas where there is danger of explosion: Press for approx. 2 seconds. - Indicates that the Radiophone has logged into a different network. Enter PIN code c If the antenna symbol is flashing, the telephone user has not got access privileges to the current network available. Only emergency calls can be placed. Network search ...
? Anti-theft card protection system In order to be able to operate the telephone, you must insert a trained SIM card first. Using a KeyCard, you can place an emergency call only. Using a trained SIM card, it is possible to operate all of the telephone’s available functions, including the telephone mode. The SIM card also performs the antitheft functions. @ Rocker switch / Scrolls through the speed-dial directory in the telephone book. Selects the SMS entries.
• Radio Dial the number using the number keys. The number you enter will appear in the display. The display will indicate the network and the network operator if a network signal is received. The antenna symbol will not flash. Dialling a telephone number The telephone mode must be switched on. Always use the area code for the number you are dialling, even if it is a local number.
Using speed-dialling . . . . . . from the telephone book Redial function You can recall stored telephone numbers with the corresponding name or the number of the entry. • Press ME. Automatic • Use / to select “Find entry by name” or “Find entry by position”. If the “Automatic redial” menu item in the setup menu is switched to “ON”, the number will be redialled automatically.
Broker’s call If someone calls you, you will hear the telephone ring and “Answer?” will appear in the display. If you receive a call from a telephone supporting call line identification (e.g. ISDN), the caller’s telephone number will appear in the display. You are still talking on the telephone to the first party. You hear the call waiting signal. Switches between the first and second call • Press ME. While you are talking on the telephone to one party, it is also possible to answer another call.
Conference calls During a multi-party call, you can talk to several parties at the same time. While talking to one party you can place a call to a second party. Setting up a conference call To end an active call: . • Press CL or Making telephone calls using the handset (special accessory) To end all calls at once: • Press CL for longer than 1 second. During normal operation, you can make telephone calls using the microphone and car speakers (hands-free function).
Phone Book Menu Start SRC The telephone can store up to 25 entries. The number of entries which can be stored on the SIM card depend on the type of card used. ^ ^ ^ Press / to select the menu items which are described in the following. • Select the function and press OK. Press CL to exit the current menu item and return to the phone book menu. Telefon CL ^ ^^ ^ ^ ENGLISH ME ^ Access the phone book menu as follows: • Press ME on the set. “Phone book” will appear in the display.
How to enter a name/text Entering letters/characters Moving the cursor in the entry text box Using the keypad you can enter names or texts for various menu items. Example “O” = press key 6 three times. If you press different keys to enter the letters one after the other, the flashing cursor will automatically move forward . You cannot make an entry unless a specific request that you do so appears in the display. Names can have a maximum of 16 and texts 160 characters.
Selecting an entry by remote control: • Select the function you wish to use by pressing / and the press OK. DEUTSCH Finding an entry by name You can alter the name and telephone number one after the other. Selecting an entry: Press / to select “Find entry by name” and press OK. To dial the telephone number automatically: . • Press Changing, deleting, moving or copying an entry Important: The memory bank must already contain at least one entry. • Find the name/entry as described above.
Show my phone number You can display your own telephone number if it has been stored. • Press / to select “Show my phone number” and press OK. If more than one number appears, press / to select the correct one. Prevent access You can prevent unauthorised persons from accessing the telephone memory bank. If desired • Press / to select “Prevent access” and press OK. • Press / to choose among the following settings: 106 “No memory restriction” – All access restrictions are deactivated.
• Press / to select “Add entry” and press OK. • Press / to choose the entry position, for example: “SIM card 101-255” or “Phone book 1-25” and press OK. • Enter the new telephone number and press OK. • Use the selection buttons to enter the name and press OK. • Enter the position number and press OK. • Use the selection buttons to enter the position number and press OK. DEUTSCH Radio Press / to select “Find entry by position” and press OK. “Enter position!” will appear in the display.
Programming with DSC Telephone Thanks to DSC (Direct Software Control), it is possible to adapt several of the Radiophone settings and functions to your own personal needs and to store these alterations. The Radiophone has been set at the factory. In the following you will find an overview of the default settings, so that you can reset the unit to these basic settings if necessary. If you wish to alter the programming: • First select the operating mode, e.g.
DEUTSCH Programming in the setup menu Select the setup menu by pressing .
Ringing tone volume Automatic answer Operating mode Press << / >> to adjust the volume of the ringing tone from between 0 and 9. 0 = off. The telephone will automatically answer incoming calls if you press << / >> to select “On” for this menu item. If this menu item is selected, you will be required to enter the access code after pressing OK. The call will be set to hands-free operation automatically.
DEUTSCH Here you can enter a maximum of up to three of your own telephone numbers and the telephone number for your mailbox. This function depends on the features the SIM card includes. SMS tone If a message has been received by SMS or voice mail, the equipment can be set to emit a beep at a preset beep volume. Off – beep is emitted after a message has been received If AOC is not supported by the card, “Set charge parameters” will appear as a menu item in its place.
After this, you can enter a charge per unit and a credit balance. • Enter the charge and type of currency with the numbers keys. If a charge or credit balance has already been entered, the last character will flash in the display. • Confirm your entry by pressing OK. Note on AOC/charge parameters Use the numbers keys to alter the amount and the type of currency. Switches on/off and alters the PIN code. Press CL to quit the menu item.
Enter the old code (in this case “0000”) and press OK. Enter the new code, press OK. Enter the new code again and press OK again. Master clear If this menu item is selected, you will be required to enter the access code after pressing OK. Enter the access code, press OK. Using this menu item you can delete the telephone settings. You can also delete the SIM card settings. Please be careful when using this function! Then select “Card” or “Phone” by pressing << / >>.
Important! It is against the law to activate the audible external alarm in Germany. Find out what the regulations are regarding this in your own country. Hands-free channel TA during call It is possible to have a traffic announcement (TA) broadcast while you are using the telephone. Press OK to view the setting already selected. Hands-free operation is possible on all four channels. Off – TA is switched off during a call On – TA is switched on.
DEUTSCH Programming in the Call Menu pressing DSC/OK briefly. • Select the call menu by pressing Start ^ ^ • Call Menu Radio If you would like to alter the programming, select the telephone mode first: • Press and access the DSC menu by . Now you can proceed with your alterations. ^ ^ ^ ^ ^ ^ Telefon ENGLISH ^ ^ Radio ^ ^ To retrieve the messages in your mailbox: Select “Call mailbox” and press CL Telephone Press OK.
Call mailbox Received SMS messages An “N” as the first letter means that the message is new. If nothing appears in this position, then the message has been read and stored. The mailbox (also known as the mobile box) is comparable to an answering machine. You can also enter your own message text here. The texts stored in the mailbox are sorted into new and old messages and can be retrieved at any time.
“New SMS message” If you would like to call whoever sent the message, while the message is on dis• press play. The telephone will automatically call the corresponding number. If the message contains a telephone number in “quotation marks”, the call will be made to that number. If there are several different telephone numbers in quotation marks, the call will be made to the first one. • • • Press / to select “Send SMS message” and press OK. • Press / to select the desired function and press OK.
To select, alter, send message. “Available networks” “Search method” Press / to select a message. After you press OK, two lines of the message will appear in the display. – – After a short waiting period, the available networks will appear in the display. Press << / >> to read the text and make any alterations if required. • Press OK. “Store?” will appear in the display. • Press / to select “Send?”, “Delete?” or “Store?” and press OK.
“Add network to list”: – known networks Press / to select the desired network from the list of network operators, press OK. Give the network most important to you priority 1. Select other networks of interest to you and determine their sequence. – • Press / to make your selection and press OK: new network You can add a new network operator to your preferred list (you will require the operator’s network code). • Press / to select the network operator you wish to delete and press OK.
Call meters The telephone is equipped with an internal meter which allows you to display the charges or call time for individual calls and the number of total calls. The default setting displays the call time. • Press / to select “Call meters” and press OK. • “Show meter during call” – Switch display of call meter during calls on/off Note If the SIM card supports AOC, the menu items for “Show meter - roam calls” and “Show meter - home calls” will not appear.
“all calls” – You cannot make any calls. It is still possible to make emergency calls. “no barring” – All restrictions on outgoing calls have been removed. Bar incoming calls: • Press / to make your selection from the menu items and press OK: ”By roaming" – If you are in a foreign country, you cannot receive any calls. – You can alter the password required to operate network barring. Phone lock You can prevent your telephone from being used by unauthorised persons.
“Edit list fix dial no.” – The list of telephone numbers entered will be displayed. “New entry fix dial no.” – You can add a new phone number to the fixed numbers list. “Activated” – Switch this function on/off. Closed user group This is a special feature which you can order from your network operator. Using it, it is possible to limit the use of the telephone to a certain group of users. Important! Do not alter any of these settings unless this function has been activated by your network operator.
It is possible to make a second call without ending the first one. You can then switch from one call to the other. You can also answer a call from a second party without ending the call to the first. Electronic mailbox provided by network operators for spoken messages. The mailbox can be compared to an answering machine. MUTE GSM network - Global System for Mobile Communication European cellular telephone standard available world-wide.
Specifications SMS - Short Message Service Using this function it is possible to send other subscribers messages up to 160 characters in length, even if the recipient’s cellular phone is not switched on or a call cannot be put through at the present time. The text is stored temporarily in the network until the recipient retrieves his messages or the time limit set by the sender has expired.
DEUTSCH Blaupunkt telephone help line Radio Address of the next service centre in your vicinity (only for Germany) Using the area code you enter this service will automatically provide you with the address and phone number of the Blaupunkt service centre nearest to you. You can also request this information by fax. ENGLISH - Radio Then call the following phone number (subject to charges): 01 80 / 5 25 56 66.
Blaupunkt-Werke GmbH Bosch Gruppe 07/98 Pf K7/VKD 8 622 400 962 0188