Operation Manual

99
DEUTSCH
Radio
Telefon
ENGLISH
Radio
Telephone
Using the telephone
All of the telephone functions can be oper-
ated using a trained SIM card.
With the card tongue protruding, insert
the trained SIM card into the slot with
the contact surface facing up.
Switch the unit on.
If you have not yet trained any SIM cards,
refer to the section on “Train or delete Key-
Card/SIM card”.
GSM network service area
To be able to use the telephone, you must
be located in an area served by the GSM
network. As soon as a network signal is re-
ceived, the symbol indicating the signal
strength and an antenna symbol will
appear in the display. If the signal is not
strong enough your call may be disconnect-
ed. If the antenna symbol is flashing, it is
possible to make emergency calls only. If
the antenna is displayed on a dark back-
ground, you are located in an area serviced
by a roaming network (may be subject to
additional charges).
Switching to telephone mode
It is possible to switch to the telephone mode
from any of the audio modes.
Press .
The display will indicate the network and the
network operator if a network signal is re-
ceived. The antenna symbol will not flash.
Dialling a telephone number
The telephone mode must be switched on.
Always use the area code for the number
you are dialling, even if it is a local number.
Manual
Dial the number using the number
keys.
The number you enter will appear in the dis-
play.
Correcting the number
To delete a digit:
Select the digit you wish to correct us-
ing the rocker switch << / >> (digit will
flash).
Press CL briefly.
To delete a number:
Press CL for approx. 1 second.
To start dialling/end call:
Press
.