AIR PURIFIER AP 1.
CAUTIONS GENERAL AirPure AP 1.1 Removes up to 99% of viruses, bacteria and hazardous smokes and chemical pollutants. • Do not clean or spill liquids or flammable solvents on the device. • Clean with soft cloth only. Disconnect AirPure before cleaning. 3-layer Filtering System Pre Filter removes big particles such as pet hairs, dust & dirt. HEPA Filter removes particles >2.5µm such as viruses, bacteria & hazardous smokes.
STRUCTURE Touch Control Operating Light Indicator Airflow Outlet Ultraviolet Germicidal Lamp AIRPURE AP 1.1 Turbo Fan Pre Filter HEPA Filter Activated Carbon Filter Aroma Diffuser Power Supply Port Airflow Inlet Bottom Cover Specification • Filter Replacement : HEPA (PM2.5), Activated Carbon • Ultraviolet Wavelength : 253.
OPERATIONS 2 1 Standby (Red Light) Turn on (Blue Light) AIRPURE AP 1.1 AIRPURE AP 1.1 Insert cable into a USB port Power Suply • Connect USB port to power supply. • Red light will turn on to indicate AirPure • Press the power button on top of the AirPure to start operating it. • The UV light function gets activated is on Standby mode after connecting to USB port. when AirPure is turned on. • Press the power button again to turn off the AirPure.
FILTER REPLACEMENT 1 Unscrew the bottom cover. 2 Remove the dirty filter and replace it with new filter. (Every new filter comes with aroma holder.
Designed and engineered by Blaupunkt
