Operation Manual

B 5

PLAYBACK

1. Press the “ " button to select “CD” mode.

2. Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.

3. Close the CD door.

4. Focus search is performed if disc is inside.

For CD disc - Total number of tracks is read and appears on the display.

For MP3 disc - “MP3” appears on the display.

5. Playback will start automatically from the first track.

6. Press the “VOL + / AL1” or “VOL - / AL 2” button to adjust the volume to desired level.

7. Press the “PLAY / PAUSE” button again when you want to stop playback temporarily.

8. Press the “STOP” button when finished.

FOLDER SELECT

Press the “BAND / ALBUM” button to select folder. (Folder select function can only operate

if disc store with at least 2 directories / files.)

PROGRAM

Up to 20 tracks fo CD disc, 99 tracks of MP3 disc can be programmed for disc play in any

order. Be sure to press the “STOP” button before use.

1. Press the “MODE” button, the display will show “P01”.

2. Select desired track by using the “SKIP +” or “SKIP -” button. (You may select a desired

album by pressing the “ALBUM” button).

3. Press the “MODE” button again to confirm desired track into the program memory.

4. Repeat step 2 and 3 to enter additional tracks into the program memory.

5. When all the desired tracks have been programmed, press the “PLAY / PAUSE” button to

play the disc in the order you have programmed.

6. Press the “STOP” button twice to terminate programmed playback.

MODE

Press the “MODE” button during playing CD / MP3 disc, each press switches the mode

function as follows:

1 - REPEAT 1

2 - REPEAT ALBUM ( *MP3 ONLY )

3 - REPEAT ALL

4 - RANDOM

5 - NORMAL PLAYBACK

POWER/FUNCTION