Operation Manual

BB 12-1/BB 12-3
USE YOUR CD SOUNDMACHINE
Program play sequence
You can program up to 20 tracks in the desired sequence.
1 In stop mode, press REP./PRO. To start to program play sequence.
[PROG]and [P01] are displayed.
2 Press / to select a track.
3 Press REP./PRO. to program the track
[PROG] and [P02] are displayed.
4 Repeat steps 2 to 4 to select and program all tracks.
When all 20 tracks are stored, no more tracks can be selected and the display shows [FUL].
5 To play program, press
6 To delete program, press in stop mode.
Play a CD
You can play CD/CD-R/CD-RW/MP3/WMA discs
1 Open the lid of the CD compartment.
2 Insert a CD with the printed side facing up.
3 Close the CD lid.
4 To stop play, press
To pause or resume play, press
You cannot play CDs encoded with copyright protection technologies.
Warning: connect your USB device directly to the USB port of the unit.Using an extension
cable is not recommended and may cause interference and failure of data transfer
Play from USB devices
1 Insert the USB connector on the device into the USB socket.
2 Press CD/USB button to switch to USB mode.
3 Press and hold CD/USB button to select a folder.
4 Press ／ to select a track．
To pause or resume play, press
5 Press to start play.
To stop play, press
Ensure that the USB device contains playable audio contents for supported fromats.
35
Warning: connect your USB device directly to the USB port of the unit.Using an extension cable is
not recommended and may cause interference and failure of data transfer
ENGLISH