Operation Manual

BP Car Phone 3.0 C User Manual
12
4.2 Switching the phone on/off
The phone is switched on by the vehicle’s ignition signal. It is switched off when the ignition is turned
off, and an adjustable time delay has passed.
The phone can also be switched on/off at any time independent of the ignition signal by pressing and
holding the power key.
4.3 Enter the PIN code
If it is necessary to enter a PIN, then you will be asked to do this by a corresponding message. Enter the
PIN with the input keys and confirm them with NEXT. You can carry out a correction if you are use
DELETE. So that your PIN cannot be seen, input characters are shown with an asterisk. The following
registration in the network can take a few seconds.
After entry of the PIN the main view of the display is shown.
NOTE: After three incorrect attempts to enter the PIN the SIM card is frozen. To unfreeze the PIN, you
will be asked to enter the PUK (MASTER-PIN).
4.4 Main display
Once the handset has been switched on and the PIN entered (if needed) the main display is shown.
From here you can navigate through the various menus and settings. The display shows:
- Reception level
- Active mode (hands-free or private)
- Volume in this mode
- Service provider
- Shortcut to unread text messages (letter and navigation symbols, navigation key)
- Shortcut to phone book (NAMES, left display key)
- Menu access (MENU, right display key)
- GPS reception (see item 3 "Overview")