Operation Manual

BP Car Phone 3.0 C User Manual

If the caller’s number is transmitted you will see this on the display. If the number is in the phone book

the caller's name will also be shown.

The radio is unmuted once the call has ended.

5.8 Rejecting a call

To reject a call select REJECT or press the end key.

5.9 Ending a call

To end a current call select REJECT or press the end key. The radio is unmuted once the call has

ended.

5.10 Adjusting the volume

During a call, the volume can only be adjusted by using the navigation key. The volume settings for

hands-free and private mode can be adjusted separately in the respective mode. The current volume

setting is shown in the display’s symbol bar.

For each call the last volume setting for that mode will be used.

5.11 Mute

Press the mute key to mute the active microphone during a call. If the microphone is muted the mute

symbol will appear instead of the volume symbol. The microphone is unmuted once the call has ended.

5.12 Call switching/call waiting (network service)

If you receive another call during a conversation answer this call by pressing SWITCH. This answers

the call and places the active conversation on hold. By pressing SWITCH again you can activate the

conversation, which is on hold, and place the new conversation on hold. In the display the caller on hold

is shown as (h) and the active caller as (a).

You can only ever talk to the active caller.

The caller on hold is placed in a queue and also cannot hear the active conversation.

NOTE:

The call switching function is only available if "Call waiting" is activated in the "Call settings".

This function is also restricted to a maximum of two callers.

5.13 Forward a Call (Second Handset is Required)

After you accepted an incoming call on one handset (see section 9.1.4 “Incoming Call”), you can forward

the active call to the other handset by pressing SWITCH. On the other handset appears a beep (not

changeable) to signal an incoming forwarded call. Press ACCEPT/connection key to accept the call or

CANCEL/end key to reject the call.

NOTE:

If you press CANCEL or the end key to reject the forwarded call, the connection to the calling

partner will be terminated on both handsets.