Operation Manual

BP Car Phone 3.0 C User Manual

9. Settings

You are able to personalize your BP Car Phone 3.0 C using the following setting options. The current

settings will be shown when you access each setting menu.

9.1 Call settings

Settings for incoming and outgoing calls.

9.1.1 Sending your own number (network service)

When you make a call your phone number may be displayed on the recipient’s phone. You can turn this

function on or off via MENU > SETTINGS > CALL SETTINGS > SEND MY NUMBER. In some cases

you will need to register this function separately with your service provider.

9.1.2 Call waiting (network service)

If you are registered for this service you can check whether call waiting is turned on or off by going to

MENU > SETTINGS > CALL SETTINGS > CALL WAITING.

9.1.3 Automatic answering

This device supports automatic answering. Select

MENU > SETTINGS > AUTOMATIC ANSWER

and

select one of the options:

ANSWER OFF

ANSWER AFTER 2 RINGS

ANSWER AFTER 5 RINGS

9.1.4 Incoming call

If an additional handset is connected to the device you can determine with this setting which of the

handsets alerts you incoming calls. You can choose between the options HANDSET 1, HANDSET 2 or

BOTH via MENU > SETTINGS > CALL SETTINGS.

By selecting HANDSET 1 you only receive an alert to an incoming call on the handset that is directly

connected to the device (not to the second interface). By selecting HANDSET 2 you only receive an

alert to an incoming call on the handset that is connected to the second interface. By selecting BOTH

you receive alerts to incoming calls on both handsets at the same time.

9.1.5 Duration of calls

To display the total duration of all outgoing calls select MENU > CALL SETTINGS > DURATION OF

CALL. After a call has ended the duration of the call will be displayed for 5 seconds. To reset the

counter select DELETE and follow the instructions. To delete the counter you will need the device code.

9.2 Call divert (network service)

Ensure that you can be reached by using the call divert options. Select MENU > SETTINGS > CALL

DIVERT to turn the following call diverts on or off: DIVERT IF UNATTAINABLE, DIVERT IF NO

ANSWER, DIVERT IF ENGAGED and DIVERT ALL VOICE CALLS. Select CANCEL ALL DIVERTS to

turn off all active diverts. When you switch ON divert you will be asked to ENTER NUMBER by using