Operation Manual

BP Car Phone 3.0 C User Manual

The whole capacity and the number of received and unread data records is displayed, both taking into

account the configured data record structure.

PARAMETER:

The data logger can be stopped and started here. Events, data record structures, cycle times,

thresholds, optimizations and data formats are established in these settings. The settings for EVENTS

and DATA RECORD STRUCTURES can be defined by pressing the #-key.

NOTE:

By changing the “data record structure” or “data format” the whole content of the data logger is

deleted. Before making any changes to settings it is recommended you read the data logger and save

the data.

SEND:

You can send by FTP as well as by EMAIL. After selecting the process the destination address is always

displayed. Start the sending process by pressing the call key.

With CHANGE you can edit the email address of the receiver and the data of the email transfer

account.

TIPS:

Refer to section 11.3 Editors for assistance on using editors.

9.7 Network

Settings that determine the network connection.

9.7.1 Selecting network automatically

Select MENU > SETTINGS > NETWORK > SELECT AUTOMATICALLY to restart the network

search. An attempt will then be made to connect to the home network. If this is not possible the next

network in the list will be used.

9.7.2 Selecting network from list

Select MENU > SETTINGS > NETWORK > SELECT FROM LIST to restart the network search. This

is a good idea if you are not located within your home network area or you wish to connect to another

network. You will then see a list of the available networks. Choose a network from the list and confirm

with OK.

9.7.3 Selecting multi band

To adjust your phone to the frequency band used go to MENU > SETTINGS > NETWORK > SELECT

MULTI BAND.

9.8 SMS message settings

This allows you to set basic SMS message settings.