Owner's Manual
Table Of Contents
- Operating and Installation Instructions
- Bluetooth PIN (1234)
- Demo Mode
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Removing / Attaching Faceplate
- Display Language
- Set Tuning Area (Step)
- Power On / Off
- Volume / Mute
- Display Brightness
- Radio Operation
- CD / MP3 / WMA / iPod Operation
- Bluetooth
- AUX Input
- Adjusting the Sound
- Menu Settings
- Specs
- Installation
25
AMP DELAY
Setting the delay with which a connect ampli er
is switched in.
Settings: 0.5/1.0/1.5/2.0/2.5 seconds
and OFF (no delay)
.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
until the desired
delay is set.
쏅 Press the rotary control
7
to con rm the
setting.
Setting the 3-band equaliser
The radio features a 3-band equaliser. For each of
the three treble, middle and bass bands, you can
select a frequency as well as adjust the level. In ad-
dition, you can adjust the quality factor for bass
and middle.
The equaliser also provides an adjustable increase
of the bass at low volume (X-bass).
Opening the "EQUALIZER" menu
쏅 In the "AUDIO" menu, select the "EQUALIZER"
menu item.
쏅 Press the rotary control
7
to open the menu.
쏅 Turn the rotary control
7
to change be-
tween the following menu items:
– EQUALIZER
– EQ TREBLE
– EQ MIDDLE
– EQ BASS
– EQ X-BASS
Note:
The submenus in the "EQUALIZER" menu are
not automatically exited after the last key has
been activated. After the setting, press the
MENU button
2
to exit the menu.
EQUALIZER
Switching the equalizer on or o . Settings: ON,
OFF.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
to change be-
tween the settings.
쏅 Press the rotary control
7
to con rm the
setting.
EQ TREBLE
Adjusting treble frequency and level of the equal-
izer.
쏅 Press the rotary control
7
to open the menu.
쏅 Turn the rotary control
7
to change be-
tween the following menu items:
– FREQUENCY
(settings: 10/12.5/15/17.5 kHz)
– GAIN
(settings: –7 to +7)
쏅 Press the rotary control
7
to change the
setting for the selected menu item.
쏅 Turn the rotary control
7
to set the level or
frequency.
쏅 Press the rotary control
7
to con rm the
setting.
EQ MIDDLE
Adjusting centre frequency and level of the equal-
izer.
쏅 Press the rotary control
7
to open the menu.
쏅 Turn the rotary control
7
to change be-
tween the following menu items:
– FREQUENCY
(settings: 0.5/1.0/1.5/2.5 kHz)
– GAIN
(settings: –7 to +7)
– Q-FACTOR
(settings: 0.5/0.75/1.0/1.25)
쏅 Press the rotary control
7
to change the
setting for the selected menu item.
Sound settings