Owner's Manual
Table Of Contents
- Operating and Installation Instructions
- Bluetooth PIN (1234)
- Demo Mode
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Removing / Attaching Faceplate
- Display Language
- Set Tuning Area (Step)
- Power On / Off
- Volume / Mute
- Display Brightness
- Radio Operation
- CD / MP3 / WMA / iPod Operation
- Bluetooth
- AUX Input
- Adjusting the Sound
- Menu Settings
- Specs
- Installation
29
LANGUAGE
(only for Toronto 420 BT)
Select the language for the display. Settings:
ENGLISH, DEUTSCH (German).
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
to change be-
tween the settings.
쏅 Press the rotary control
7
to con rm the
setting.
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: ON VOL-
UME (power-on volume; 1–50) or LAST VOLUME
(volume set last before switching o the car sound
system).
Danger!
High volume
The power-on volume can be unex-
pectedly high if the LAST VOLUME setting is se-
lected and a high volume was set the last time the
radio was switched o .
Always set the device to a moderate volume.
쏅 Press the rotary control
7
to open the menu.
쏅 Turn the rotary control
7
to switch between
the menu items "LAST VOLUME" and "ON
VOLUME" (power-on volume).
Upon selecting "LAST VOLUME":
쏅 Press the rotary control
7
to con rm the
setting.
Upon selecting "ON VOLUME":
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
to set the volume.
쏅 Press the rotary control
7
to con rm the
setting.
TRAFFIC VOL (tra c information volume)
(reception area EUROPE only)
Setting the minimum volume for tra c announce-
ments. Settings: 1 – 50.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
to set the volume.
쏅 Press the rotary control
7
to con rm the
setting.
HANDSFREE VOL
(for Toronto 420 BT only and with connected
cell phone)
Adjusting the level for handsfree volume. Settings:
–5 to +5.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
to set the level
adjustment.
쏅 Press the rotary control
7
to con rm the
setting.
BEEP (button beep)
Switching the con rmation beep on or o .
Settings: ON, OFF.
Note:
When storing radio stations, a con rma-
tion beep sounds even if the OFF setting is
selected.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
to change be-
tween the settings.
쏅 Press the rotary control
7
to con rm the
setting.
User settings