User manual
User manual BSD-9000 / BSD-9001
9
Silence the alarm momentarily
Press SNOOZE to turn the alarm off temporarily. The alarm will sound again when the snooze period is over.
Note: snooze time is 9 minutes.
Stop the alarm
Press ON/OFF: The alarm will stop, and will sound again 24 hours later.
Cancel Wake Setting
Press ALARM repeatedly until all alarm indicators disappear from the display.
SLEEP TO THE RADIO
In sleep mode, the radio will turn off automatically after a specified time.
In radio ON mode, press SLEEP to select the desired time before turn off among 120-90-60-45-30-15-00.
When in SLEEP mode, press SLEEP button to read the remaining sleep time.
SOUND PRESETS
When listening to the radio, press AUDIO button repeatedly to select desired sound preset: VOICE, MUSIC or NORMAL.
USING THE RADIO
Listen to the radio
ON/OFF.
by pressing BAND.
and .
VOLUME +/-.
ON/OFF.
To enhance radio reception ability:
FM/ SW: Extend the telescopic antenna.
MW/LW: Rotate the unit horizontally for optimum reception.
Saving Preset Stations
1. Tune to a station to be saved as a preset station (sListen to the radio
2. Press MEMO once and you will see display.
3. Press Preset / to select a preset number.
4. Press MEMO to save station as selected preset number.
5. Repeat above steps to preset a maximum of 10 stations for each band respectively.
Selecting Preset Stations
Press Preset / to select a preset number.
RDS FUNCTION
When FM station with RDS is received, the station name (PS) is displayed. Press RDS button repeatedly to display the
program type (PTY), the radio text (RT), the frequency and the station name (PS).
AUXILIARY FUNCTION
LINE IN jack, using an audio cable (not supplied).
PRODUCT INFORMATION
Power consumption: 5W
Frequency Range:
FM 87.5-108.0 MHz
MW 530-1600 KHz
LW 150-280 kHz
SW 5.80-10.0 MHz
BLAUPUKT TECH SA