Communication BT Drive Free 112 1 021 104 112 www.blaupunkt.
Contents BT Drive Free 112 .................................................................................................................2 Bluetooth technology........................................................................................................3 Safety and general information .....................................................................................3 Disposal notes ...............................................................................................................
Bluetooth technology BluetoothTM is a registered trademark of Bluetooth SIG, lnc. Bluetooth is a wireless communication technology with short range. It enables wireless connections between all compatible portable and stationary communication devices. The technology is based on a radio connection that ensures a fast and reliable transmission of voice and data information.
Disposal notes Use the return and collection systems available to dispose of the old device. Do not discard any batteries in the household trash; instead, return them to the corresponding collection sites. Scope of delivery The scope of delivery includes: – BT Drive Free 112 – Lithium-ion battery – 12-volt DC vehicle charger adapter – USB charger cable – Mounting clip for the sun visor – Operating instructions Installation at the sun visor Sun visor flipped up towards the vehicle roof.
Inserting the battery 2 3 1 4 5 Battery information The device is equipped with a lithium-ion battery. The battery is compatible with the Nokia battery BL-5B. The full performance of a new battery is not achieved until after two or three complete charging-discharging cycles. The battery can be charged and discharged several hundred times, but it looses its capacity over time.
Charging the battery The BT Drive Free 112 is operated with a rechargeable battery. Charge the battery completely before its first use. Read the section "Battery information" before starting the charging process. Connect the BT Drive Free 112 with the vehicle charging adapter via the USB cable. Insert the vehicle charging adapter into the cigarette lighter of the vehicle. The BT Drive Free 112 can also be charged with the USB cable connected to the computer.
Overview 1 2 3 6 5 7 8 9 4 Loudspeaker MODE button Microphone Increase volume (+) MF button (illuminated multifunction button) Decrease volume (–) Mounting clip for the sun visor Charging socket (micro USB port) Battery compartment Switching on/off Switching on To switch the unit on, press the MF button for approx. 3 seconds until you hear a high-pitched signal tone and the MF button lights blue. Afterwards, the MF button lights blue and the device is switched on.
Registering (pairing) and connecting with the cell phone Before you can use the BT Drive Free 112, you must register and connect it with a Bluetooth-ready cell phone. Registering is a one-time process and required only for the first connection with the cell phone. The BT Drive Free 112 can be registered with up to eight cell phones and be connected simultaneously with two cell phones. – Hold the BT Drive Free 112 within range of a Bluetooth-ready cell phone; the distance should not exceed a metre.
Multi-connection function The multi-connection function allows the simultaneous use of the BT Drive Free 112 with two cell phones. This is advantageous for users with a personal and a business cell phone. Establishing a connection with two cell phones There are several options of connecting the BT Drive Free 112 with already registered cell phones. – Automatic connection When switching on the BT Drive Free 112, a connection is automatically established with the two most recently connected cell phones.
Using the BT Drive Free 112 After successfully completing the registration and charging the battery, the following functions can be executed: Making a call – Voice dialing* To activate voice dialing, briefly press the MF button. You hear several signal tones. After the signal tone, speak the voice command. After the voice command has been recognized, the cell phone dials the number associated with it.
Transferring a call To transfer a call from the BT Drive Free 112 to the cell phone, press the MODE button for 3 seconds. Repeat the step to transfer the call back to the BT Drive Free 112. Note: With some cell phones, the connection is disconnected if you transfer the call to the cell phone. To transfer the call back to the BT Drive Free 112, you have to briefly press the MF button instead of the MODE button.
Resetting the BT Drive Free 112 The BT Drive Free 112 can be registered with up to eight cell phones. You can delete the registration list and reset the hands-free system to the factory settings. – Switch the BT Drive Free 112 off and on again. Note that no connection to a cell phone may be active. – Press and hold the MF button together with the "+" and "–" volume buttons for approx. 10 seconds until the MF button is flashing red and blue intermittently.
Fault removal If a connection between the BT Drive Free 112 and a cell phone cannot be established, observe the following: – Ensure that the battery is charged. – Ensure that the Bluetooth function of the cell phone is activated. You find more detailed information in the operating instructions of the cell phone. – Check whether the BT Drive Free 112 is connected with the cell phone.
Technical data Bluetooth specification Version 2.1 + EDR (Enhanced Data Rate) + SSP (Secure Simple Pairing)* Supported Bluetooth profiles HSP (Headset Profile), HFP (HandsFree Profile) and A2DP (Advanced Audio Distribution Profile) Frequency range 2.4 to 2.48 GHz ISM band Bluetooth range Up to 10 metres (Class 2) Dimensions 110 (L) x 48 (W) x 15 (H) mm Weight approx. 60 g Battery charging time approx.
FCC-Statements All following FCC statements are valid for the Industry Canada Standard (IC) as well. General Interference Warning: (according to FCC part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Caution: (pertaining to FCC part 15.
Blaupunkt AudioVision GmbH & Co. KG Robert-Bosch-Str.
