Communication BT Drive Free 211 00_BTDriveFree211_Umschlag.indd 153 1 021 104 211 www.blaupunkt.com 05.08.
Contents BT Drive Free 211 Bluetooth Car Kit........................................................................... 16 Bluetooth technology..................................................................................................... 16 Safety and general information .................................................................................. 17 Disposal notes ...................................................................................................................
Safety and general information 1. Carefully read the operating instructions and follow the instructions. 2. To avoid any damages and malfunctions, do not drop the device from an elevated height. 3. Protect the device against humidity, water and other liquids. If the device should have been exposed to water, humidity or other liquids, do not use it since it may lead to damages of the device and to injuries from electrical shock or explosion. 4.
Scope of delivery The scope of delivery includes: – BT Drive Free 211 Bluetooth Car Kit (docking station and headset) – Lithium-ion battery – 12-volt DC vehicle charger adapter – USB charger cable – Operating instructions – Fastening clip for the sun visor Use headset separately The headset can also be used outside of the docking station for phone calls. To use the headset in the docking station or to remove it from the docking station, proceed as shown in the following figures.
Overview 7 6 5 1 9 2 10 3 ENGLISH 4 8 11 13 12 14 16 15 17 Loudspeaker (docking station) Charging socket (micro USB) (docking station) Headset charging switch Decrease volume at the docking station (–) MF button (illuminated multifunction button) (docking station) Increase volume at the docking station (+) MF button (illuminated multifunction button) (headset) Battery compartment Docking station Headset Fastening clip for the sun visor Spring contacts Loudspeaker (headset) / ear plugs) Charging
Inserting the battery 1 2 3 4 Installation at the sun visor Sun visor flipped up towards the vehicle roof. Sun visor flipped down towards the windshield. 20 02_BTDriveFree211_gb.indd 20 07.04.
Before its initial use The BT Drive Free 211 is a combination of a docking station and a headset that is operated via chargeable batteries. Completely charge the batteries of docking station and headset before the initial use. Read the section "Battery information" before starting the charging process. Connect the BT Drive Free 211 with the vehicle charging adapter via the USB charger cable. Connect the vehicle charging adapter to the cigarette lighter of the vehicle.
Charging the battery in the docking station The docking station is charged via the USB cable. During the charging process, the MF button of the docking station lights up red. the complete charging of the docking station takes approx. 3 hours. The indicator of the MF button switches off once the charging process is complete. The docking station and headset are charged simultaneously if the headset is in the docking station and the charging switch is switched on.
Switching BT Drive Free 211 on/off ENGLISH Disconnect the BT Drive Free 211 from the power supply if you do not want to charge the batteries. Disconnect a completely charged battery from the charger since overcharging negatively impacts the service life of the battery. If a battery is not used over an extended period of time, it looses its capacity over time. Important: Docking station and headset should be charged completely if you do not use the devices for a longer period of time.
– Activate the Bluetooth function of the cell phone and start the search for Bluetooth devices. (For further details, please read the operating instructions of your cell phone.). – Select "BT DF 211" from the displayed list. – If necessary, enter the PIN code "0000" and confirm the entry. After successful pairing, you hear a long signal sound and the MF button flashes blue 5 times. The BT Drive Free 211 automatically connects with the cell phone and changes to standby mode a few seconds later.
ENGLISH Answering a call To answer an incoming call, briefly press the MF button or the call button of the cell phone. Ending a call Briefly press the MF button or the end call button of the cell phone to end a call. Rejecting a call To reject an incoming call, press the MF button until you hear a new signal sound. Transferring a call To transfer a call from the cell phone to the headset, press the MF button during the call until you hear a signal sound.
– The Bluetooth car kit meets the Bluetooth specification v2.1 + EDR. The flawless function between the BT Drive Free 211 and Bluetooth-ready cell phones from different manufacturers and of different types cannot be guaranteed since it depends on the compatibility.
Warranty We provide a manufacturer's warranty for products bought within the European Union. For devices purchased outside the European Union, the warranty terms issued by our respective responsible domestic agency are valid. The warranty terms can be called up from www.blaupunkt.com. Bluetooth specifications Version 2.1 + EDR, Class 2 Supported Bluetooth profile Headset and hands-free profiles Operating frequency range 2.402 to 2.
FCC-Statements All following FCC statements are valid for the Industry Canada Standard (IC) as well. General Interference Warning: (according to FCC part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Caution: (pertaining to FCC part 15.
Blaupunkt AudioVision GmbH & Co. KG Robert-Bosch-Str. 200 D-31139 Hildesheim 5 101 040 000 07/11 450 166 - de, gb, fr, es, pt, it, nl, sf, pl, hu, ro, bg 00_BTDriveFree211_Umschlag.indd 152 05.08.
