User manual

User manual BTD-7000 / BTD-7001
9
* The alarm will turn on again at the same time next Monday.
6. 
* The alarm will turn on again at the same time next Saturday.
Cancel alarm settings
In Standby mode, long press ALARM ALARM again to confirm and
disappears from display. The alarm is cancelled.
SLEEP TO THE RADIO
In sleep mode, the radio will turn off automatically after a specified time.
5. Press SLEEP 
6. Release SLEEP button
7. Press SLEEP button to check the remaining sleep time.
8. If you want to switch off the radio before sleep ends, press ON/OFF button.
DIMMER
Press SNOOZE/DIMMER repeatedly in standby mode to set the brightness of LCD display.
RADIO
Listening to the Radio
1. Press ON/OFF switch to turn on the radio.
2. Press FUNCTION button to select FM or MW band.
3. Press or to tune to your desired radio station.
4. Adjust the volume to desired level.
5. Press AUDIO button repeatedly to select desired sound preset: VOICE, MUSIC or NORMAL.
6. Press ON/OFF button again to turn off the radio.
To enhance radio reception ability:
FM: Extend the telescopic antenna.
MW: Rotate the unit horizontally for optimum reception.
Presetting radio stations
1. Tune to a station.
2. Press MEMO 
3. Press or to select a preset number.
4. Press MEMO again to save station as selected preset number.
5. Repeat above steps to preset a maximum of 40 stations (20 MW / 20 FM).
Retrieving the preset stations
 or to access a preset station.
RDS FUNCTION
When FM station with RDS is received, the station name (PS) is displayed. Press RDS button repeatedly to display the
program type (PTY), the radio text (RT), the frequency and the station name (PS).
CONNECTING AUXILIARY SOURCE
1. Connect your auxiliary source (e .g. mp3 player) to the LINE IN jack on the left side of the unit.
2. Press FUNCTION button to select LINE IN mode.
3. Start playback from your auxiliary source.
3. Adjust the volume to desired level.
4. To stop playback, disconnect your auxiliary source from the LINE IN jack.
PRODUCT INFORMATION
Power consumption: 5W
Frequency Range:
FM 87.5-108.0 MHz
MW 530-1600 KHz
BLAUPUKT TECH SA