Radio / CD Dakota CD31 Santa Fe CD31 Operating instructions
1 2 14 13 3 4 5 12 11 6 10 7 PORTUGUÊS 8 9 3 ESPAÑOL FRANÇAIS ENGLISH
OPERATING ELEMENTS 1 2 3 4 5 6 7 8 9 : ; < = > 4 button for unlatching the removable release panel BAND button for selection of FM memory levels and the MW or LW wavebands, source selection for radio operation TS button, starts the Travelstore function SCAN button, starts scan function CD slot X-BASS button, X-Bass function CD eject button CD•C button, source selection between CD, radio, CD-changer and AUX (AUX not featured on Dakota CD31) AUDIO button, controls bass, treble, balance and fader Arrow ke
Radio Operation ..................... 10 CLOCK - Time ........................ 16 Switching on Radio Operation ....... 10 Select Waveband/Memory Level ... 10 Setting the Station ......................... 10 Adjusting Station Search Sensitivity 10 Saving a Station ............................ 10 Saving a Station Automatically (Travelstore) .................................. 11 Going to a Preset Station .............. 11 Scanning through Available Stations (SCAN) ...........................
NOTES AND ACCESSORIES Thank you for choosing a Blaupunkt product. We hope you will enjoy your new equipment. Please read these instructions before using for the first time. Blaupunkt’s editors are constantly working to write clear, generally understandable instructions for use. If you still have questions about how to use your equipment, please refer to your dealer or to the telephone hotline in your country. You will find the telephone numbers on the back of this booklet.
Note: ● Do not drop the panel. ● Do not expose the panel to direct sunshine or any other source of heat. ● Avoid touching the contacts on the panel with your skin. If necessary, clean the contacts using a lint-free cloth dipped in alcohol. Removing the Release Panel 1 ➮ Press the ● ● straight forward and then to the left. When the release panel has been separated from the device, it switches itself off. Any current settings are saved. If a CD has been inserted, it remains in the device.
SWITCHING ON AND OFF Switching On and Off The device can be switched on and off in the following ways: Switching On and Off with the Vehicle Ignition If the device is correctly connected to the vehicle ignition, and has not been switched off with button >, it is switched on and off along with the ignition. You can also switch the device on when the ignition is off: ➮ Press button >. Note: To protect the vehicle battery, the device is automatically switched off after an hour if the vehicle ignition is off.
button =. To reduce the volume ➮ Press the button =. Setting Switch-On Volume ➮ Press button > briefly “MUTE” appears in the display. Adjusting Muted Volume The mute level is adjusted as follows: The volume the device plays at when switched on can be adjusted as follows: ➮ Press the MENU button :. ➮ Press the or button 9 until ➮ Press the MENU button :. ➮ Press the or button 9 until ➮ Adjust the mute level with the “ON VOL” appears in the display. ➮ Adjust the switch-on volume with the buttons 9.
RADIO OPERATION Radio Operation Switching on Radio Operation If the current operating mode is CD, CDchanger or AUX (only for Santa Fe CD31) ➮ Press the BAND button 2. or ➮ Press the CD•C button 7 until “RADIO” appears in the display. Select Waveband/Memory Level This radio receives stations in the VHF (FM) waveband as well as MW and LW (AM) stations. Three memory levels are available for the FM waveband, and one memory level is available for each of the MW and LW bands.
➮ Press the SCAN button 4 again. The scanning process is stopped, and the last set station remains active. Note: ● Any stations previously saved on this level will be deleted. Setting Scan Time ➮ Press the MENU button :. ➮ Press the or button 9 until ➮ Briefly press the TS button 3. Storing starts. “T-STORE” appears in the display. When the procedure is complete, the station in memory location 1 of the memory level in question is played.
RADIO OPERATION ➮ When the setting is complete, press the MENU button :. Note: ● Once you have changed the regional setting, radio operation begins at the pre-set frequency 87.5 MHz. CD OPERATION CD Operation This device can be used to play standard CDs with a diameter of 5 inches. Danger of damage to CD drive! This device is not suited for playing so-called CD singles (3 inch diameter) or shaped CDs. No liability will be accepted for damage caused to the CD drive by unsuitable CDs.
buttons 9 until fast searching begins. Playing Tracks in Random Sequence (MIX) ➮ Press button 4 (MIX) ;. ➮ Press button 3 (RPT) ; again. “RPT” disappears from the display and normal play resumes. Pausing During Play ➮ Press button 2 ;. “MIX” appears in the display. The next track is played at random. “PAUSE” appears in the display. Ending MIX function ➮ Press button 2 ➮ Press button 4 (MIX) ; again. “MIX” disappears from the display.
CD CHANGER OPERATION CD Changer Operation Changing Display Contents Note: ● For information on handling CDs, inserting them and operating the CD changer, please consult the operating instructions for your CD changer. To change the display between track number plus CD number and track number plus play time Starting CD Changer Operation ➮ Press the CD•C button 7 until ➮ Press the “CHANGER” appears in the display. Play will start with the first CD that the CD changer recognises.
“MIX CD” flashes up, the display shows “MIX”. To play the tracks of all the CDs in the CD changer in random sequence ➮ Press button 4 (MIX) ; again. “MIX ALL” flashes up and the display shows “MIX”. FRANÇAIS ➮ Press button 4 (MIX) ; briefly. Pausing During Play ➮ Press button 2 ( ) ;. “PAUSE” appears in the display. ESPAÑOL To play the tracks of the current CD in random sequence Note: The lengths of these samples can be set. Please consult the section on “Setting Scan Time” under “Radio Operation”.
CLOCK - TIME or button 9 to switch modes. When the setting process is complete ➮ Press the CLOCK - Time Displaying the Time To display the time ➮ Press the ➮ Press the MENU button :. button < briefly. Setting the Time ➮ Press the MENU button :. ➮ Press the or button 9 until “CLOCKSET” appears in the display. ➮ Press the To display the time when the device is switched off and the ignition is switched on ➮ Press the MENU button :. button 9. The time is shown in the display.
X-BASS ➮ Press the AUDIO button 8. “BASS” appears in the display. ➮ Press the or just the bass. button 9 to ad- Adjusting the Treble To adjust the treble ➮ Press the AUDIO button 8. “BASS” appears in the display. or button 9 until “TREB” appears. ➮ Press the ➮ Press the or just the treble. X-Bass means increased bass at low volumes. X-Bass can be increased in steps from 1 to 3. ➮ Press the X-BASS button 6. ➮ Press the / or button 9 until the desired setting is displayed.
EXTERNAL AUDIO SOURCES TECHNICAL DATA External Audio Sources Technical data Instead of the CD-changer, you can connect a different external audio source that has a line output (not for Dakota CD31). Such sources include portable CD, MiniDisc or MP3 players. To connect an external audio source, you need an adapter cable (Blaupunkt No. 7 607 897 093). The AUX input must be switched on in the menu. Amplifier Switching AUX input on and off ➮ Press the MENU button :.
GUARANTEE ENGLISH Guarantee PORTUGUÊS ESPAÑOL FRANÇAIS The extent of the guarantee depends on the statutory conditions applicable in the country where the device was bought. If there should be a fault in your device, please refer to your dealer, providing proof of purchase. If the statutory minimum guarantee period in your country is less than 12 months, Blaupunkt provides a 12 month manufacturer’s guarantee.
Service numbers / Numéros du service après-vente / Números de servicio / Número de serviço Deutschland Belgique / België France Nederland Great Britain Ireland Danmark Sverige Norge Suomi Österreich EÏÏ¿˜ âeská republika USA Singapore Slovensko Tel.: Fax: 0 18 05 00 02 25 02.525.54.44 014 010 70 07 023 565 63 48 018 958 383 66 (01) 4149400 44 89 83 60 08 750 15 00 66 81 70 00 094 359 91 01 610 39 0 015 762 241 026 130 04 41 800-266 25 28 006 535 054 47 042 175 873 212 0 51 21 49 40 02 02.525.54.
