Operation Manual

9
 PSS Control (Optional Power Switch
required)
You can control Power Switches in your alarm
system remotely with PSS Control function.
 On – The Power Switch at selected
channel will be turned on.
 Off – The Power Switch at selected
channel will be turned off.
 Learning – Control Panel will send
learning code to learn Power Switch into
selected channel (SA2500 and SA2700
only)
 Capture Image (SH3000 only)
SH3000 panel can be controlled remotely via
SMS command to take a picture with its PIR
Camera. The picture will be uploaded
according to the Control Panel setting.
 Enter the.zone number of your PIR Camera,
then presses “Capture Image” to send the
SMS command.
NOTE:
 For SH3000 panel, Power Switches are
divided into “groups” and multiple Power
Switches can be assigned to a group.
Select a PSS Channel in Connect2Home
app will turn on/off all Power Switches in
the group.