Operation Manual

17
 “Device Type” information will only be
updated after you successfully synced with
the Control Panel
 Siren Control (Optional Outdoor
Bellbox Required)
The Siren Control option allows you to edit
Siren settings if you have included BX-S1
Outdoor Bellbox in your alarm system.
 Select the function you want to edit and
choose to enable or disable the function.
 Press “Save” to send the SMS command to
panel.
Siren Tamper
The tamper protection function of Outdoor
Bellbox can be disabled temporaily
 When set to Enabled, the Bellbox tamper
protected will be activated.
 When set to Disabled, the Bellbox tamper
protection will be disabled for 1 hour. After
1 hour, the tamper protectio will be enabled
automatically again.
Confirmation Setting
The Outdoor Bellbox can be enabled or
disabled for arming and disarming confirmation.
 When set to Enabled, the Bellbox will beep
when the system is armed or disarmed to
confirm the mode change.
NOTE:
 For SH3000 Control Panle, only Zone 1~
30 can be synced.