Operation Manual

18
 When set to Disabled, the Bellbox will not
make any sound when system mode is
changed.
 This function is only available via
Connect2Home app for SA2700 and not
available from panel LCD menu.
Entry/Exit Setting
The Outdoor Bellbox can be enabled or
disabled from sounding warning beeps during
Entry Time and Exit Time
 When set to Enabled, the Bellbox will beep
during Entry and Exit Time.
 When set to Disabled, the Bellbox will not
beep during Entry and Exit Time.
 This function is only available via
Connect2Home app for SA2700 and not
available from panel LCD menu.
Learn RP
This function is used to include Repeater
accessory device in the alarm systen. Use this
function to send a learn code to repeater.
Please refer to Repeater manual for detail.
 PSS Control (Optional Power Switch
required)
You can control Power Switches in your alarm
system remotely with PSS Control function.
 On – The Power Switch at selected
channel will be turned on.
 Off – The Power Switch at selected
channel will be turned off.
 Learning – Control Panel will send
learning code to learn Power Switch into
selected channel (SA2500 and SA2700
only)
NOTE:
 For SH3000 panel, Power Switches are
divided into “groups” and multiple Power
Switches can be assigned to a group.
Select a PSS Channel in Connect2Home
app will turn on/off all Power Switches in
the group.