Operation Manual

20
 For High/Low Temperature condition, set
the temperature threshold for the Power
Switch to be activated/deactivated.
 For Time condition, set the time when the
Power Switch should be activated/
deactivated.
 For Alarm Event condition, set the events
for the Power Switch to be
activated/deactivated, you can set more
than one events
 Press “Save”. The phone will send a SMS
command to panel to program the Home
Automation setting.
<NOTE>
 For system mode change (Arm,
Home, Disarm), the Power Switch
channel selection is limited to #1
only.
 For High/Low Temperature and
Time setting. You can select any
Power Switch channel from #1 ~ #4
 High/Low temperature setting in
Home Automation does not affect
High/Low temperature report
setting.