Operation Manual

CRP8BK / CRP8WH
9
USB charging your mobile phones:
Plug in the USB cable into the USB Charge Out port, then connect the opposite end to
your phones for changing.
Note: The USB charge spec. is 5.0V/500MA; the original USB cable is required for Charging.
There will cause some damages if illegal cable were using.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused
by electro-static discharge or other interference, unplug the DC jack to disconnect the AC
power (and remove the backup battery). The clock radio will be reset to default settings
and you need to set it again.
SPECIFICATIONS
Alarm duration: 1 hour (3-minute on, 9-minute off interval)
Snooze duration: 5 to 60 minutes
Nap timer duration: 5 minutes Nap timer selections: 5, 15, 30, 45, 60, 75, 90 minutes to
OFF
Sleep timer selections: 5, 15, 30, 45, 60, 75, 90 minutes to OFF
Volume: L01 (minimum) to L15 (maximum)
Preset Memories of radio: 10
USB charging: 5V, 500Ma
Power adaptor: 5.5V, 550mA
Default settings:-
Time format: 24 hour
Time: 0:00
Alarm 1 and 2: 0:00
Volume: L07 (Level 7)
Snooze duration: 05 (5 minutes)