Operation Manual

CRP8BK / CRP8WH

STOPPING AND RESETTING THE ALARM TO COME ON THE NEXT DAY

When alarm 1 or 2 is sounding, the related 1 or 2 icon flashes. Press the AL 1.2 once to

stop the alarm and reset it to come on the following day. After that 1 or 2 icon keep

lighting up on the display.

Note: When alarm is sounding, press the Ʒ / NAP or RADIO / SLEEP will activate the nap

timer or the radio and stop the alarm for the day. Do not plug in the AUX cable to the unit

overnight as this will prohibit the alarms from functioning.

SNOOZE OPERATION (default snooze duration is 5 minutes)

When alarm is sounding, presses

once, the alarm will be silenced and come on

again after the set snooze duration.

Note: if your second alarm activates while the first alarm is sounding or it is in the snooze

mode, the second alarm overrides the first alarm (the first alarm is reset to come on the

next day).

USING THE HI-LO DIMMER

Press

to adjust the brightness of the LED display. This can only be done when the

radio is off or the unit is not sounding.

USING THE NAP TIMER

The NAP Timer allows you to rest and automatically wake up in 5, 15, 30, 45, 60, 75 or 90

minutes.

1. Press Ʒ / NAP once, the display shows the nap icon and the default naptime “05” (5

minutes).

2. Press Ʒ / NAP again to select your desired naptime. It will exit to time display if no

button pressed for 5 seconds.

3. The nap icon lights up when the nap timer is counting. When the nap timer reaches 0,

the alarm will sound and the nap icon will flash. Press Ʒ / NAP once to stop the nap alarm,

the nap icon will go off.

Note: If the nap time is set up then your alarm is sounding, your nap time will be

cancelled automatically.

SETTING UP THE FM ANTENNA

Extend the FM wire antenna fully and vary the direction for best FM reception. Do not

strip, alter or attach to other antennas.

LISTENING TO THE FM RADIO

1. To turn on the radio, press SLEEP/RADIO once, the display shows “ON” and then the

radio frequency readings in Mhz.

2. Press Ʒ or ͩ to tune the radio to a desired station. Press and hold Ʒ or ͩ to scan for

the next clear station.

3. To adjust the volume, press VOL once, the display shows“L07”, press Ʒ or ͩ to adjust

volume from L01 (minimum) to L15 (maximum)

4. Press

to turn off the radio.