Operation Manual

CRP8BK / CRP8WH

Remark: keep your radio away from fluorescent lamps or other electronic devices, which

may cause interference to the radio.

USING THE PRESET MEMORY

This clock radio features a total of 10 preset memories of FM stations. These allow you to

preset your favorite stations and access them quickly.

1. Turn on the radio and select a radio station you like to memorize.

2. Press and hold the SET appears and “01” flashes. Press SET once to store Memory 1.

3. Press Ʒ or ͩ to select another station you like to memorize. Then press and hold SET

appears and “01” flashes. Press Ʒ or ͩ once, “02” appears. Press SET once to store

Memory 02.

4. Repeat Step 2 to 3 to preset memories 3 through 10.

5. To access a preset station at any time, press the SET one at a time while the radio is on.

6. To edit a preset station, select another station and then repeat Step 2 to 4. This

overrides the original settings.

USING THE SLEEP TIMER

1. Press the RADIO/SLEEP twice to enter the sleep mode. The sleep icon “L” and the sleep

time “05” (5 minutes) and will flash on the display.

2. Press the RADIO/SLEEP again as needed to adjust the sleep timer from 15, 30, 45, 60, 75

or 90 minutes.

3. When the display changes back to show the time, press the RADIO/SLEEP once to show

the sleep time remaining.

4. The radio will play for the programmed sleep time and then shut off.

5. To turn off the radio before the sleep time has elapsed, press

once.

USING THE PROJECTION

Press ͩ once at the left side of your unit to turn on or off the projection.

When the projection is on, press and hold ͩ to flip the projected time upside down.

At the back of your unit, turn the rotary knob to rotate the projected time by 90 degree.

TO USE THE AUX FUNCTION TO PLAY MUSIC IN YOUR IPHONE, IPOD OR MP3

You could play the music in your iPhone, iPod or MP3 device by using the AUX function.

1. Plug in the AUX cable to the AUX Line-in socket at the back of your Radio Alarm Clock

and one end to the earphone socket of your iPhone, iPod or MP3 device.

2. Turn on your MP3, iPhone or iPod to play the music you like.

Note: when you plug in the AUX cable, it will no function of the RADIO/ SLEEP function,

volume of the unit can’t be adjusted when it in AUX function.Do not plug in the AUX cable

to the unit overnight as this will prohibit the alarms from functioning.

ENGLISH