Operating instructions

26
Light bulb specifications
Diameter: 8 mm
Length: 28 mm
Voltage: 12 V, 3 W
Changing the battery in the
remote control
➮ Push the button on the battery
compartment J to the right (see A
below).
➮ Pull the battery compartment J
out of the remote control (see B
below).
➮ Change the 3 V battery (CR 2025).
Changing the light bulb
➮ Detach the monitor from the ceiling
plate (4 screws).
➮ Remove the 6 screws from the
rear.
➮ Carefully lift off the rear wall.
➮ Take out the old bulb (see picture
below).
➮ Fit a new bulb (12 V, 3 W).
➮ Refit the monitor.
OPERATION
Bulb
Screws for securing the
ceiling-mounted monitor
B
A
J