Operating instructions

22
Cables
INSTALLING THE MONITOR
System cable
(13 pin)
Cable for the
interior lighting
(3 pin)
Adapter cable
Interior lighting connection (3 pin)
Red = Operating voltage (+12 V)
White = To the door switch
(Door open = Earth)
Black = Earth
To avoid discharging the battery, we
recommend you use a switched
operating voltage (ignition).
Warning notice: The operating voltage
cable must be protected with at least a
1.5 A fuse.
Monitor connection (13 pin)
Connect the system cable (13 pin) >
to a signal controller (IVSC-3302 or
IVSC-5502). (The voltage supply is
provided by these devices. Operating
instructions are supplied with the
devices).
Or
Use the plug-in adapter cable ? to
connect to the 12 V supply voltage and
an external video/DVD device:
Red = ACC+12V
Yellow = +12 V direct current
Black = Earth
Red RCA = Audio IN (R)
White RCA = Audio IN (L)
Yellow RCA = Video IN
Jack (blue) = Infrared loop-through
for connection to the
IR-sensor input of
DVD-ME2 / DVD-ME3.
Attention: To be used only in conjunction
with DVD-MEx series products!
>
Signal cable
(monitor hous-
ing) (13 pin)
?
=
@