Operating instructions

INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER

ENGLISH

DEUTSCH

Configuring SCAN for one CD or for all the CDs in the magazine

The SCAN function provides you with the option of choosing whether only the

tracks on the CD you are currently listening to should be scanned.

1 Switch to the setup menu by pressing the MEN button :.

2 Press the softkey assigned to the SCAN menu item until the required

option appears alongside SCAN.

CD - Only tracks on the CD currently being listened to will be scanned.

MAG - All tracks on all the CDs in the magazine will be scanned.

Repeating tracks or CDs (REPEAT)

To repeat a track or a CD, activate the repeat function.

Activating the repeat function

Proceed as follows:

1 Select the required track or CD,

2 Switch to the functions menu by pressing the CD-C button ? and

3 press the softkey assigned to REPEAT.

✔ The track or CD is repeated until the repeat function is cancelled. RPT

appears in the status area of the main CD menu.

Cancelling the repeat function

If you want to cancel the repeat function,

1 press the ESC button 9.

Activating the repeat function for tracks

If you only want to repeat the current track, you have to set the RPT function to

TRK before activating it.

1 Switch to the setup menu by pressing the MEN button : and

2 press the softkey assigned to RPT until TRK appears alongside it.

TIME

RPT

SCAN

MAG

MIX

SCAN

PROGRAM

NAME

MIX

REPEAT

TIME

TRK

RPT

SCAN

MAG

MIX