Operating instructions

INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER

Adjusting the display brightness

You can adjust the display brightness separately for the day and night display. If

you want to adjust the display brightness,

1 use the right knob/pushbutton ; to select the DAY or NIGHT item that

you require and

2 repeat the steps described under “Adjusting the viewing angle”.

Adjusting the fading effect for menus

If you want to adjust the fading effect for menus,

1 use the right knob/pushbutton ; to select the SPECIAL EFF menu item.

2 You can choose between 3 different fading effects by pressing the right

knob/pushbutton ;. The default setting is 0 (no effect).

Configuring power-on / telephone / navigation / traffic infor-

mation announcement volume and GALA settings

In the VOLUME setup menu you can configure the unit’s power-on volume, the

minimum volume for traffic announcements (TA-MIN), the minimum volume for

voice output (NAV-MIN), the value for the speed-related automatic sound ad-

justment feature (GALA), and the volume for telephone calls.

Note: If during a traffic announcement or navigation voice output

the system volume is higher than the value set for the minimum

volume, the traffic announcement or voice output will be played at a

fixed level above the system volume.

DISPLAY

NIGHT

BRIGHTNESS

DAY

ANGLE

SPECIAL EFF

SETTINGS

VOLUME

DISPLAY

CLOCK

LANGUAGE

INSTALL