Operating instructions

INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER

ENGLISH

DEUTSCH

The power-on volume is a limiting value. This means that if the volume when

you switch the unit on is lower than the configured power-on volume, the volume

level that was last set will be applied. If the volume when you switch the unit on

is higher than the configured power-on volume, the volume will be reduced to

the power-on volume level when you turn the unit on.

Note: If the power-on volume is set to maximum, the volume level

can be very high when the unit is switched on. This can cause hear-

ing damage.

To configure the volume setup,

1 open the setup menu,

2 open the VOLUME menu item,

3 use the right knob/pushbutton ; to select the menu item that you want

to configure and

4 press the right knob/pushbutton ;.

5 Use the right knob/pushbutton ; to adjust the settings.

✔ The selected menu item will appear enclosed in a dashed line border. To

help you configure the volume settings more easily, the volume will be

increased / decreased as you make your changes.

6 Press the right knob/pushbutton ;.

VOLUME

PHONE

NAVI-MIN

GALA

TA-MIN

POWER-ON