Radio / CD Lausanne RD 148 Nevada RD 148 Operating instructions Lausa/Neva RD 148 d® 1 21.05.
17 16 15 14 13 12 1 2 3 4 5 6 7 8 9 2 Lausa/Neva RD 148 d® 2 21.05.
Selecting the operating mode ..... 38 Radio operation with RDS ........... 38 AF - Alternative frequency .................... 38 REG - regional programme .................. 38 Selecting a waveband .......................... 39 Station tuning ........................................ 39 Automatic tuning / ....................... 39 Manual tuning with << >> .................. 39 Scrolling through the broadcasting networks (FM only) ............................... 39 Switching between the memory banks (FM) ....
Quick reference 1 Switching on/off with the buttons: Press one of the buttons illustrated here after you have inserted the KeyCard. The unit will play at the pre-adjusted volume. Switching on/off with the KeyCard: The set is switched on or off by inserting or removing the KeyCard. Note: Be sure to read the information in the section on “KeyCard theft protection system”.
To stop CD Scan: Press SC once again. 5 LD - Loudness When the car stereo is playing quietly, the Loudness function creates a more natural sound by boosting the low frequency range. DEUTSCH ENGLISH FRANÇAIS Track selection Press ginning Up Down once to go back to the be- of the current track. Fast advance, audible (CUE). Hold down >> as long as required. CD operation CD Scan Press SC briefly “CD-SCAN” will appear in the display. The unit will scan all CD titles.
7 Display l) PTY m) CD n) T5 a d e f g h ij k l m - Programme type function is activated - A CD is inserted in the unit - Track no. 5 is playing 8 KeyCard theft protection system To operate the set the KeyCard must be inserted first.
Radio operation 3/MIX MIX plays the CD tracks in random order. Switching MIX on/off: Press 3/MIX briefly. The mode activated will appear briefly in the display: “MIX CD” or “MIX OFF”. ? PTY (Programme Type) In the PTY mode, the preset buttons become programme type buttons. With each preset you can select one programme type such as NEWS, SPORT, POP MUSIC, EDUCATE, etc.
@ DSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings to suit your personal needs and preferences. See the section on “DSC programming” for more information. A AUD Adjusts the treble and bass frequencies. Different settings can be stored for FM, AM and CD. To store the settings: Select the operating mode. Press AUD once and use the rocker switch to adjust the settings.
What you need to know Installation Before using your new car radio, please read through the following information carefully. If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read the enclosed instructions on installation and connection carefully. FRANÇAIS In order to ensure that the set operates properly the positive power supply line must be connected via the ignition and the permanent +12 V lead.
KeyCard theft protection system This car radio includes one KeyCard as standard equipment, but it can also be operated with a second card. If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer. If you use 2 KeyCards, the settings stored on the first card will be transferred to the second.
The second KeyCard available from your specialised dealer also allows you to display a special turn-on message each time the radio is switched on. If you would like to deactivate the flashing tongue in general, select “LED OFF” in the DSC menu. The freely selectable text with a maximum of 48 characters can be programmed by all dealers who have the required equipment available. Care of your KeyCard Please refer to the section on “DSC programming - READ KC”.
Selecting the operating mode Using the SRC (source) button you can switch between the radio and CD audio sources. The CD mode is not available unless a disc is inserted. To switch between the modes, • press SRC briefly. Radio operation with RDS (Radio Data System) The Radio Data System will enhance your enjoyment when you listen to FM radio stations. More and more radio stations have begun to broadcast RDS information along with their regular programming.
Manual tuning: With this car radio you can select between the following wavebands: FM 87.5 - 108 MHz MW 531 - 1602 kHz LW 153 - 279 kHz • Select the desired waveband by pressing the BND button. Note: In the DSC menu it is possible to block MW or LW or both wavebands for station selection. The advantage of doing this is that only the required wavebands can be selected and it is no longer necessary to press BND so often. If necessary, refer to the section on “DSC programming – AM ON or AM OFF”.
If “AF” is not lit up, • press AF. This fulfils the requirements for selecting stations with << >>. • Switching between the memory banks (FM) The display will indicate which preset button is currently activated. You can switch between the memory banks I, II and T in order to store stations and recall them later. Note: Should you attempt to store a station which has already been stored before on another memory bank, the corresponding preset button and the memory bank will flash briefly in the display.
During the actual scanning process “AMSCAN” or “FM-SCAN” will appear in the display. To select a scanned station and switch off the Radio-Scan function: • Press SC or the seek tuning rocker switch briefly. If no station is selected, the scan function will switch off automatically after the frequency band has run through completely. The radio will tune into the station selected before the scan started. You can alter the automatic seek tuning sensitivity.
Programme type Use << >> to have the last selected programme type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1-6. Requirement: PTY must be active. You can use DSC to select Deutsch or English as the language (refer to the section on “DSC programming – PTY LANG”). The following list indicates all of the programme types which are available. The letters printed in bold are identical to the abbreviation which appears briefly in the display.
If you would like to listen to a station with the selected PTY, press / to start the seek tuning function. If the radio is unable to find a station offering the selected programme type, the display will show “NO PTY” and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated. • Scanning stations with PTY SCAN Requirement: “PTY” must appear in the display. • Press the SC button.
Traffic programme station reception with RDS-EON Note: As already mentioned, these functions are only supported by a limited number of RDS stations at the present time. The abbreviation “EON” stands for Enhanced Other Networks, which means that information is exchanged within a radio network. Many FM radio stations provide their service area with traffic messages at regular intervals.
Press the rocker switch or • press a preset button which has a traffic programme station allocated to it. Alternatively: b) Switch off the priority for traffic announcements: • DEUTSCH Although this volume was preset at the factory, you can use the DSC function to alter the setting (see “DSC programming - TA VOL”). Press TA. “A” will disappear from the display.
CD operation This car stereo is equipped with a CD drive. Note: Use only standard circular CDs measuring 12 cm in diameter! CDs measuring 8 cm in diameter or CDs in different shapes such as a butterfly or beer mug are not suitable for playback using this equipment. This is very likely to result in the destruction of the CD or the CD drive. We assume no liability for damage to the equipment caused by playing unsuitable CDs.
Use this function to scan all of the CD tracks. To start the Scan function: • Press SC briefly, the display will indicate “CD-SCAN”. The titles will be scanned one after the other in ascending order. To stop the Scan function: • Press SC once again briefly. The track currently scanned will continue to play. SCAN will also stop if you • press one of the buttons marked DSC, SRC, , << >> or / . The automatic correction of the time or just the hours using DCF 77 can be switched off.
Displaying the clock Deactivating the hour correction function You can set the clock to permanent display in both the radio and CD modes. If another function is selected, the clock display will disappear for approximately 8 seconds and the station selected, for example, will appear in the display. To switch the display mode: • Press LD for approximately 2 seconds.
As a result, the bass sounds may be lost or reverberate, the mid-range tones sound too overpowering and music instruments or voices may be distorted or the total sound quality may be completely lifeless. The overall sound quality can be greatly enhanced if certain frequencies are suppressed or boosted. This car stereo is equipped with a parametric “LOW EQ” filter, which can be set from 50 to 200 Hz.
Assistance in setting your equaliser Frequency range Sound impression / Problem What to do Notes Bass 50 – 100 Hz Bass reproduction too weak Boost the basses with the “LOW EQ” filter Frequency: 50 to 100 Hz Level: +4 to +6 dB Avoid distortion. Boost the level carefully if the speaker diameter is too small. Unclear bass Playback reverberates Unpleasant pressure on the ears Reduce the lower mid-range with the “LOW EQ” filter Frequency: 100 to 200 Hz Level: approx.
If you wish to alter any of the programming, • press DSC. button to Use the rocker switch and the select and adjust the functions described in the following. The display will show you the setting you have selected. VOL FIX PTY LANG Select function Adjust/recall value To select the language used to indicate the programme type: DEUTSCH or ENGLISH DEUTSCH ENGLISH To “train” a second KeyCard. Please read the information in the section on “KeyCard theft protection system “Training” a second KeyCard”.
LED ON Here you can choose between LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra anti-theft protection when the unit has been switched off and the KeyCard removed. BEEP Acknowledgement tone for all functions which require a button to be pressed for more than one second. The volume can be adjusted from between 0 to 9. (0 = off). LO-DX To adjust the seek tuning sensitivity. “LO” stands for local reception. “DX” stands for distant reception.
0 ENGLISH ON 4 DX 1 30 10 sec. ON AM ON 3 0 dB/50 Hz CLK AUTO Wavebands: FM MW LW FM sensitivity: 87.5 – 108 MHz 531 – 1602 kHz 153 – 279 kHz 0.9 µV at 26 dB signal-to-noise ratio FM frequency response: 20 - 16 000 Hz CD player Frequency response: 20 - 20 000 Hz ENGLISH Address of the next service centre in your vicinity (only for Germany) If you would like to know the address of the next Blaupunkt service centre of your area without having our service list at hand: - Find out your area code.
Blaupunkt-Werke GmbH Bosch Gruppe 7/97 Pf/Ts Lausa/Neva RD 148 dk K7/VKD 8 622 401 394 (DK) 27 21.05.
