Instruction manual

LS 195
Operation
A.Switch On/Off the Product
1.Before turn on the system, please connect it according to the System Connection
Instruction.
2.Plug on and connect AC power supply with this product.
(Caution: Power source must be consistent with specification.)
3.Press on the POWER switch button on the Rear Panel of the main unit to switch on the
system, the standby indicator will light up. Then press the STANDBY button on the remote
controller to enter the normal status. Press the button on the remote controller once
again to keep power in standby status.
B. VOLUME Selection
1.Press the VOL + button on the front of the main unit, or the VOL + button on the remote
control to increase the volume.
2.Press the VOL - button on the front of the main unit, or the VOL - button on the remote
control to decrease the volume.
C. TREBLE Selection
1.Press the TREBLE + button on the remote control to increase the treble level.
2.Press the TREBLE - button on the remote control to decrease the treble level.
D. BASS Selection
1.Press the BASS + button on the remote control to increase the bass level.
2.Press the BASS - button on the remote control to decrease the bass level.
E. MUTE Selection
1.Press the MUTE button on the remote controller once to keep the performance silent.
Press "Mute" again to cancel mute function and the main volume instruction light will be
flashing.
F. Analog/digital input and PCM decoder.
1. Our soundbar system provide two analog inputs and one optical & two coaxial inputs.
You can play and entertain your home music depend on your music device input. Please
use properly cable for connecting first, then switch to mode accordingly.
2. Our soundbar also built-in PCM decoder, but please kindly note that only can work
when you set up the input music device in PCM mode, like DVD or TV ect.
35